4/27/2006


For Sale:

Konig 250cc, VA Engine #90212 (1990) $ 1,250.00

Konig 350cc, VB Engine, I bought this engine used, it was manufactured in 1981 or 82. This engine was
re-bored in 2000 and has 45.14mm diameter pistons. I have just torn this engine down for this race season and rebuild it. $1,550.00

Konig 350cc, VB #VB93616. It was one of the last ones from the factory, manufactured in 1993. $2,975.00

Konig 500cc, VC (1978) $1,000.00

Konig 500cc, VC (1981) $1,300.00

Konig 500cc, VC #89744 (1989) This engine has less than about a total of 6 heats. $3,000.00

Konig 700cc, VD #93275 (USTS Hi-Point 4 years in a row). This engine has one heat on it since the last rebuilt in spring 2003. It has new crank throws, rods, large rod end bearing rollers, and I believe also new small rod end bearings. I have done my own engine and crank work for years. Due to family
problems this engine was not run in '93, or '94 the first race being mid '95 or '96. $3,250.00

All engines where purchased new except as noted. The engines are in factory stock condition (other than replacement parts) and complete. Engines are complete with pipes, torque tower tube and lower unit. All engines will be disassembled and rebuilt before sale.

Pugh lay-down Hydro used for 350cc class, complete including handles, turn fin. steering hardware, hand throttle, foot slider lever for exhaust pipes, Konig kill switch, rear boat cowling, and fuel tank for $1,250.00

2- Keller Steering 3" diameter Hubs very good condition $ 20.00 each

500cc Konig Exhaust Pipes Set, 1 diameter x 5 stinger good condition $120.00 set
500cc Konig Exhaust Pipes Set, 1 diameter x 5 stinger good condition $120.00 set
500cc Konig Exhaust Pipes Set, 15/16 diameter x 8 stinger one pipe good condition, 2nd pipe has re-welded stinger $110.00 set
500cc Konig Exhaust Pipes Set, 15/16 diameter x 8 stinger good condition $140.00 set
500cc Konig Exhaust Pipes Set, 1 diameter x 5 1/4 stinger very good condition $200.00 set
500cc Konig Exhaust Pipes Set, bent style stinger, small diameter 1st tube (old style) poor condition $70.00 set
500cc Konig Exhaust Pipe, 15/16 diameter x 8 stinger good condition $60.00
Konig style Exhaust Pipes, 3 pipes, good for parting out and repairing your pipes cones and mid-sections in fair to good condition $50.00 for the set of three
250/350cc Konig Exhaust Pipes Set, good condition, one stringer needed to be re-welded to cone $110.00 set
250/350cc Konig Exhaust Pipes Set, good condition $120.00 set

Please e-mail
Bill Kurps
ProHydroRacer@BellSouth.net

Price in US dollars plus shipping.