Guys Im New On Here But Injoy All The Info I Get Just By Reading Your Treads Theres Not Much Info About Hp Outboards Out There Unless I Had A 2.5 Merc. My River , Boat Or Walet Wont Hold One Of Them Bad Boys No Way.i Dont Race Well Not Apba Anyway We Race All The Time .see I Need To Get Ahead Of My Buddys We All Have 40hp Yamahas On Wood Strip Boats 13.5 Ft Long Most Are 38inchs Wide With 3/8 Inch Concave Bottoms About 63mph On Strait Smooth Water And About 45 Through A Very Curvey River They Are Blast To Run . Tiller Handle , Merc Chopper Props 10-1/4 X 18 Pitch, Boat Weights About 220 Dry. I Have 50 Hp Carbs And A 50 Hp Exhaust Tuner . And Yes The Gray Wire Is Cut Any Help On Port Work Or Cylinder Head Work Would Be Appreciated I Have Extra Blocks Heads, Carbs, And Cranks To Work With . Please Help Or At Least Tele Me What Not To Do With The Port Work. Thanks J Nye
Bookmarks