LoveCraft half Transformed into Miss KTdoodle. A story by KT

**Skoontz** · 04-17-2008

Thanks, Tim!

Looks like you put a capsule on your tri hull too! Does it go as fast with a 45 on it as the 140? LOL

**MissKTdoodle** · 05-11-2008

havent been on in a while. just stopped by to say hey..
salt springs at the end of the month... WOOT!

KT

**MissKTdoodle** · 05-11-2008

Originally Posted by Skoontz

Thanks, Tim!

Looks like you put a capsule on your tri hull too! Does it go as fast with a 45 on it as the 140? LOL

don't say "lol"

**Jeff Akers** · 05-11-2008

Originally Posted by MissKTdoodle

salt springs at the end of the month... WOOT!

KT

KT, do you mean Oroville.. may 31-june 1 or are you talking about Salt Springs on june 21-22....?

Let me know....I've got some A stuff to bring for you and your dad....

**Skoontz** · 05-11-2008

Jeff:

Due to money constraints....Projections looking better and better this month...So, the goal is pay off all racing debts, then go racing! So, Oroville may be tough, cause school do4es not end until the 13th or 14th down this way.....

Salt Springs, Oh yeah, hang on to yer pants cause here we come with a brand new sponsor!

**MissKTdoodle** · 05-19-2008

Originally Posted by Jeff Akers

KT, do you mean Oroville.. may 31-june 1 or are you talking about Salt Springs on june 21-22....?

Let me know....I've got some A stuff to bring for you and your dad....

ewww, really, I have to goto Oriville?????!!!!!?!?!
grosssssssss!

**MissKTdoodle** · 05-19-2008

Originally Posted by Skoontz

Jeff:

Due to money constraints....Projections looking better and better this month...So, the goal is pay off all racing debts, then go racing! So, Oroville may be tough, cause school do4es not end until the 13th or 14th down this way.....

Salt Springs, Oh yeah, hang on to yer pants cause here we come with a brand new sponsor!

uhhhh... who might our sponsor be....?
and how come I don't know about this??
and uhhh. schoool gets outt on the 12th, that's a thursday.

**Skoontz** · 05-19-2008

Think yellow KT, think yellow.

The one on the left is KT Doodle...The middle is my incredible wife who puts up with all my antics, and the left, is Allie-Ooops, my step daughter, senior at LaCosta Canyon, going to
San Francisco State U in August

**Skoontz** · 06-01-2008

So, we head out to the lake....91 octane fuel, timing set where it has always been set, at th center hole.

KT heads out, planes off, looses a cylinder, comes back on the rope...

Good spark, and compression, and fuel...

I yank the head....The circumference of both pistons came unglued and grounded one plug from firing....Aluminum everywhere....Center of pistons, like new....

The cylinders, clean and still have the machine crosshatch on them. The ports, no marks, which usually get dinged if something was sucked in....

I'll disassemble the motor and show photos....But for now, anyone got any ideas? Is there a chance, and I'm reaching here, that a bad batch of pistons
were made, like with metal from leftust lower ubangia? This is almost a perfect circle with shiney metal, about 3/* of an inch all the way around...not gray discolored metal like detonation.

Everything ran great last time in the water....

Calling Sea-Way for more parts tomorrow....

**David Mason** · 06-02-2008

There is always a chance you had a bad batch. Not usually the problem, but I have seen it happen on other parts. I doubt you will ever know if that was a bad batch.

You might want to check your fuel system for any flaws, maybe it starved it ?