yamaha or tohatsu?

[tthibodaux]

Hey Tim I was told that you know this Mr. RAANA, is he fast or not, just wondering

I'm stayin out of this.

[tthibodaux]

Alright just looking for some info. anyone in here a yamaha or tohatsu expert. wanting to know if yamaha even makes a 60hp 3 cylinder and same for tohatsu. If there is sutch a motor, are they capable of producing as much hp as a 3 holer omc?

Lets get back to the real question. This is what iwanajohnson wanted to know.

[Fast Fred]

back to the real question.

yes yamaha makes a 60hp 3cyl, with the 60hp carbs (same as a 50hp) a hot 50hp yam or hot -sue mite stay with it. can a ricer 50hp make as much hp as an OMC, NO,they are small up dated copys of the OMC's, what works on one works on them all, you can put a divider in the side transfur on any of them.

[tthibodaux]

yes yamaha makes a 60hp 3cyl, with the 60hp carbs (same as a 50hp) a hot 50hp yam or hot -sue mite stay with it. can a ricer 50hp make as much hp as an OMC, NO,they are small up dated copys of the OMC's, what works on one works on them all, you can put a divider in the side transfur on any of them.

Thanks Fred.

[Jeff Akers]

I'm stayin out of this.

Boring

I was just geting the popcorn ready

[tthibodaux]

Boring

I was just geting the popcorn ready

What you talkin bout Jeff?

[Jeff Akers]

What you talkin about Jeff?

No way Tim, I'm staying out of this ! LOL!

[tthibodaux]

No way Tim, I'm staying out of this ! LOL!

[girls race 2]

Did someone say popcorn?

[Neil_M50D2]

Yes I fully aggree with Tim back to the question.

Does this open any thoughts, why did TOHATSU put in more ports, a lot of more work, there must be some real benefits from it?

With a divider, the overall transfer port can be wider. A port opening can only be about 65% of the bore in width or the ring will grab the edge. Also, with a divider you can better direct the flow. And, you can increase the velocity as needed.

Might ruin a few blocks experimenting.
Go slowely,
Neil