Originally Posted by
John Taylor
After seeing the story on that 250CC of yours and the need of 2 single ring 52 millimeter pistons are needed to continue this engines onslaught at records I will soon enough go into the pistons box for Anzani As and see if I can come up with the beasts for pistons you need. Its sleeved aluminum block is very similar to what Kay Harrison produced at HRP as the back bone engine blocks for the Harrison racing outboards. Go to the Harrison thread on this BRF site and see them for yourself. Ironically the Harrison A and B blocks I have here are fitted to Anzani crankcases to use Anzani components as the base for everything else. Eventually Harrison became completely Harrison as it evolved away from using Anzani components.
Bookmarks