Page 1 of 60 1234567891011121314151617181920212223242551 ... LastLast
Results 1 to 10 of 594

Thread: Konig History

  1. #1
    Sam Cullis Mark75H's Avatar
    Join Date
    Nov 2004
    Location
    Annapolis, MD USA
    Posts
    1,795
    Post Thanks / Like

    Default Konig History

    I'll let Dieter König's own words start us off:
    Attached Images Attached Images  
    Last edited by Ron Hill; 01-17-2013 at 10:25 PM.
    Since 1925, about 150 different racing outboards have been made.


  2. #2
    Sam Cullis Mark75H's Avatar
    Join Date
    Nov 2004
    Location
    Annapolis, MD USA
    Posts
    1,795
    Post Thanks / Like

    Default

    Dieter's father, Rudolf started making little outboards with very long shafts for sailboats. People said he was crazy, but sailboaters liked the inexpensive fuel stingy outboards and he developed a steady business. Here is that J motor from 1935. As far as I know this was the first König racer.
    Attached Images Attached Images  
    Last edited by Mark75H; 03-20-2005 at 06:22 PM.
    Since 1925, about 150 different racing outboards have been made.


  3. #3
    Team Member Master Oil Racing Team's Avatar
    Join Date
    Jan 2005
    Location
    Sandia, Texas
    Posts
    3,831
    Post Thanks / Like

    Default Konig History

    Wish I had a flash & done more angles, but anyway. The first three are on a riverboat on a lake in West Berlin, celebrating 50 years of Konig Motorenbau. (1927-1977). The other two are some motors at the factory.
    Attached Images Attached Images     



  4. #4
    Sam Cullis Mark75H's Avatar
    Join Date
    Nov 2004
    Location
    Annapolis, MD USA
    Posts
    1,795
    Post Thanks / Like

    Default

    Is that motor next to the "side board" display motor a 3 cylinder radial 500cc?

    I wish Dieter was still around to tell us about this stuff.
    Since 1925, about 150 different racing outboards have been made.


  5. #5
    Team Member Master Oil Racing Team's Avatar
    Join Date
    Jan 2005
    Location
    Sandia, Texas
    Posts
    3,831
    Post Thanks / Like

    Default Konig History

    You mean the small little motor on the end? I don't think it's a radial, but I never looked real close. I think it was the style Rudolph first built for sailboats or rowboats. The shaft here was cut short for it to fit the display.



  6. #6
    Sam Cullis Mark75H's Avatar
    Join Date
    Nov 2004
    Location
    Annapolis, MD USA
    Posts
    1,795
    Post Thanks / Like

    Default

    No, I meant the next one. I know about the one on the end. It was marketed as a "sideboard" motor that clamped to a board midships. I think the distributor "Bray" in England sold a whole lot of them for König.
    Since 1925, about 150 different racing outboards have been made.


  7. #7
    Team Member Master Oil Racing Team's Avatar
    Join Date
    Jan 2005
    Location
    Sandia, Texas
    Posts
    3,831
    Post Thanks / Like

    Default Konig History

    Sam:

    You've got a good eye, especially for a not too good photo. I never caught that before. I've wandered around Deiter's factory many days. He never had any restrictions, & I always had a camera or two, but I never remember seeing those motors. I snapped a couple of quick shots, with poor lighting, on the way to our seats on the cruise. I was on my honeymoon with my wife Debbie after the racing was done, & I wasn't really concentrating on the engine display.



  8. #8
    Team Member Master Oil Racing Team's Avatar
    Join Date
    Jan 2005
    Location
    Sandia, Texas
    Posts
    3,831
    Post Thanks / Like

    Default

    There might be some more Eric, but this is the one I think of. I've posted a lot of Konig stuff here and there, but I had been planning on putting pics here, except I keep sidetracking. Not that it's bad to add to the subject on current threads, but it's easy to get lost when you try to go back for a second look.


    Likes Jeff Lytle liked this post

  9. #9
    David Weaver David Weaver's Avatar
    Join Date
    Dec 2004
    Location
    Alpharetta, GA
    Posts
    196
    Post Thanks / Like

    Default Konig 125cc

    Here is a Konig 125 that I raced for several years. We bought this engine and boat from Jane and Ralph Smith. The powerhead was pretty much "stock" from the factory. The only modification that I remember was water injection into the pipe. We ran this on 12:15 lower unit. I wish we had had an 11:15 back then. But I am not sure that the engine could have taken too much more vibration.
    Attached Images Attached Images  

  10. #10
    Team Member Master Oil Racing Team's Avatar
    Join Date
    Jan 2005
    Location
    Sandia, Texas
    Posts
    3,831
    Post Thanks / Like

    Default

    Can't believe it's been that long since anything has been added here.

    These are some pics I took at the Konig factory in 1976. Dieter let me take pictures of anything I wanted. I wish I knew about the museum upstairs back then. I only heard about it a couple of years ago from Steve Litzell. Dieter was so preoccupied with the present, I guess he never stopped to think I would have liked a glimpse of the past.

    These are castings for the FA Konig. I can't recall all the things Dieter told me about the making of these, but I believe his sister Margaret made them.
    Attached Images Attached Images         



Thread Information

Users Browsing this Thread

There are currently 5 users browsing this thread. (0 members and 5 guests)

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •