Rev limiter

[pr-550yamahadriver]

thanks for the info i´ll experiment that

[Fast Fred]

the other style gots a needle on the box, the higher up the needle goes the more timin it brings in. too much timmin is not good.

[quty06]

the screw on the bottom of the seesaw controls the max advance.
find TDC and line up the pointer first.

seesaw= the arm hooked to the mag plate, with the two screws in it, top screw controls the low side or pickup timin.

thanks for the reply,

i'll find out

[quty06]

but with ""hitachi"" CDI

any recomendation other than this or