Thanks Thanks:  0
Likes Likes:  0
Results 1 to 4 of 4

Thread: pressure?

  1. #1
    Team Member JohnsonM50's Avatar
    Join Date
    Apr 2005
    Location
    Jersey
    Posts
    602
    Post Thanks / Like

    Default pressure?

    Im preping my hydro to run, its an OMC 25 with a Yamato 102 foot adapted below the waterpump. It has above the waterline exhaust and has been run alot before this happened.. I was unscrewing the foot drain plug and it was under pressure, maybe 20 or more psi. It had some sign of a little bit of water but ran good last time out and wasnt leaking at all, not a drop. Im thinking the waterpump would not hold such pressure stopped but could it have pushed water into the foot to be trapped behind the seal? Have any of you who race Yamatos ever seen a foot pressurize for any reason? I suspect the pump but wonder too if the gasket could let water in that might be trapped.

  2. #2
    Jeff - UFL Racing sst45jefff's Avatar
    Join Date
    May 2005
    Location
    Washington State
    Posts
    0
    Post Thanks / Like

    Default

    Yes the water pump can push water past the seal into the gearcase. One of the symptoms is the gearcase being presurized.
    Sound like you need to change the seals below the water pump.

  3. #3
    That Tohatsu guy. jeff55vDSH's Avatar
    Join Date
    Jul 2005
    Location
    Region 7
    Posts
    81
    Post Thanks / Like

    Default

    Quote Originally Posted by JohnsonM50 View Post
    Im thinking the waterpump would not hold such pressure stopped but could it have pushed water into the foot to be trapped behind the seal?
    What direction is the seal facing? The fix may be as simple as turning the seal around to face the other way.
    Jeff Yungen

  4. #4
    Team Member JohnsonM50's Avatar
    Join Date
    Apr 2005
    Location
    Jersey
    Posts
    602
    Post Thanks / Like

    Default

    Quote Originally Posted by jeff55vDSH View Post
    What direction is the seal facing? The fix may be as simple as turning the seal around to face the other way.
    Thanks Jeff, On these as stock OMC feet theres 2 seals back to back 1 down for oil the other up for water. They were in right but worn out. With the coupler about an inch below and 2 seasons on em I shoulda done them with the spring waterpump.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Water pressure and temperature guages
    By Boatnut in forum Technical Discussion
    Replies: 0
    Last Post: 09-06-2007, 08:32 PM
  2. Where to get info 60's 40hp OMC
    By fyremanbill in forum Technical Discussion
    Replies: 19
    Last Post: 12-01-2006, 01:35 PM
  3. Engine Pressure anaylsis
    By Tomtall in forum Technical Discussion
    Replies: 0
    Last Post: 09-28-2006, 07:03 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •