Thanks Thanks:  0
Likes Likes:  0
Page 1 of 3 123 LastLast
Results 1 to 10 of 29

Thread: 225 ficht ram

  1. #1
    Team Member
    Join Date
    Jun 2006
    Posts
    13
    Post Thanks / Like

    Default 225 ficht ram

    Hello,

    I would like to know, if it is possible to modified the 225 ficht ram setup, to give more rpm and horsepower.
    how to abolish the rpm limiteur

    The 225 and 250 and HO are the same engine with different setup...so...it is only the ECU setup so...

    speak soon and many thanks by advance
    jm

  2. #2
    Team Member looseunit225's Avatar
    Join Date
    Sep 2008
    Location
    Moama NSW Australia
    Posts
    111
    Post Thanks / Like

    Default

    if its ficht injection!

    get rid of the injection and bolt V8 carby's to it or get a mad efi injection system for it!

    thats the general rule of thumb for those things

  3. #3
    Team Member
    Join Date
    Jun 2006
    Posts
    13
    Post Thanks / Like

    Default

    ok, you know somebody who has a 225cv ficht ram equiped with mad efi ?
    it is simple to install?
    speak soon
    jm

  4. #4
    Team Member looseunit225's Avatar
    Join Date
    Sep 2008
    Location
    Moama NSW Australia
    Posts
    111
    Post Thanks / Like

    Default

    yeah theres a guy here in Aus with a full mad efi setup on a ficht block and its near on 400hp but that was a big dollar engine!

    im not sure why but i was told that the ficht engines werent that good!

  5. #5
    Team Member
    Join Date
    Jun 2006
    Posts
    13
    Post Thanks / Like

    Default

    have you sture information about the ficht are not good engine?

    It is near the same powerhead like the carbs engine 3liter....

    perhaps electronics spares are not good?
    speak soon

  6. #6
    Team Member looseunit225's Avatar
    Join Date
    Sep 2008
    Location
    Moama NSW Australia
    Posts
    111
    Post Thanks / Like

    Default

    i think it was more about the inlection system or something! i think it had a tendancy to lean out on oil or on fuel and cause damage that way!

  7. #7
    Team Member looseunit225's Avatar
    Join Date
    Sep 2008
    Location
    Moama NSW Australia
    Posts
    111
    Post Thanks / Like

    Default

    how did you go with getting some info on the engine?

  8. #8
    Team Member
    Join Date
    Jun 2006
    Posts
    13
    Post Thanks / Like

    Default

    Hi,

    I haven't information about the engine, and the possiblity tunning of this engine.

    Do you know the max RPM of the engine before limitor?
    Mad efi it is not possible for ficht ram say me Mr Taylor.Problem with injector


    If you have an idéa???.....
    regards
    jm

  9. #9
    Team Member looseunit225's Avatar
    Join Date
    Sep 2008
    Location
    Moama NSW Australia
    Posts
    111
    Post Thanks / Like

    Default

    mad efi is regrettebly not run by mr Wayne Taylor after he past away earlyier in the year!

    but i hear they are still going! i will find out from this guy here in Aus cause i am 100% he is running a ficht block but he is running Motec injection system with a Mad efi Slide front on it!

  10. #10
    Team Member
    Join Date
    Aug 2007
    Posts
    17
    Post Thanks / Like

    Default

    Limiter is at 6150. Darren is running a heavly modified ficht block on one engien other is a e-tec block and they have Motec. The system works very well but is complicated. To run a mad efi system you would need to take off the ficht sytem.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •