New Quincy Parts

[fbref5269]

hi all,

was wondering if there is any interest in some new quincy parts made from the original quincy patterns. here is a list so far:

Filler Blocks:Mercury engines. A-B, MK-30&55 MK-500 and MK-75&78.
MK-1000, MK-650, MK-350, KG-9.
Champion Hot-Rod filler block

also new looper pistons for the a, b, c, d and f. thinking the rings will be the single chrome ring used at the end of the looper run and used on the z engines not the L ring.

as patterns are found other parts may be available.

parts are very hard to find so thinking this may help. let me know if there is any interest.

frank

[Bob Dunlap]

Frank
I have new Hot Rod filler block for the A and B engines, old and new. They are available now, I have been making them for a couple of years. They are a improvement over the old filler blocks as the center hole is not cut out so you can machine it to fit you pipes or expansion chamber elbow.

[RogerH]

Frank,
I've got a couple of stock Mk75's that I'd like to "hot rod", and have been looking for a couple sets of filler blocks and pipes. Heck, I'd like a set for a late 70's Merc 1500 too.
Roger

[fbref5269]

hi all,

just an update on the parts. i am waiting for a price on the castings for the wide sweep elbows for the loopers and gen 3 megaphones. let me know if there is any interest in gen1 megs.

now for a real shot in the dark...... does anyone out here have or know who has the pattern for the quincy throttle? pm me with any infoplease. i want to recast them too.

frank