Thanks Thanks:  0
Likes Likes:  0
Results 1 to 10 of 10

Thread: Or motor

  1. #1
    Team Member Growler's Avatar
    Join Date
    Nov 2005
    Location
    Sydney, Australia
    Posts
    11
    Post Thanks / Like

    Default Or motor

    Hi All

    Just seeing if anyone has seen something like this before???
    Attached Images Attached Images

  2. #2
    G&M Racing mercguy's Avatar
    Join Date
    Dec 2004
    Location
    Marysville, Wa
    Posts
    293
    Post Thanks / Like

    Default

    Quote Originally Posted by Growler View Post
    Hi All

    Just seeing if anyone has seen something like this before???
    looks like a variety of parts.............Yamato 302 tower and gearcase, Tohatsu M40/50 D belly pan and Tohatsu 40C powerhead???
    Daren Goehring
    63-R
    DSH, 500ccmh, 750ccmh


  3. #3
    Team Member
    Join Date
    Apr 2007
    Location
    Country Victoria Australia
    Posts
    43
    Post Thanks / Like

    Default Yep.....

    well its got a new look......that's for sure..........
    Couldn't ya have chosen the colors before ya drank all them stubbies
    Is it the same powerhead???
    anyway I reckon it'll go allright. Have ya run it yet? ring me when ya do. i'd love to know what it's doin'.
    Attached Images Attached Images

  4. #4
    Administrator Ron Hill's Avatar
    Join Date
    Nov 2004
    Location
    Tustin, California
    Posts
    3,407
    Post Thanks / Like

    Default BRF Speed Records

    BRF Speed Records

    I sure wish you and others with different kinds of boats would post your speeds on BRF Speed Records.

    Start your own post with boat size, motor specs and your speeds. First off, I'm interested in your speed and I know others are too. Secondly, I think someone might have a boat like yours that would go faster....

    It that a billet head on the Tohatsu?

    There are two boats in this post, right...are both on 302 mid sections?

  5. #5
    Team Member
    Join Date
    Apr 2007
    Location
    Country Victoria Australia
    Posts
    43
    Post Thanks / Like

    Default

    I believe it to be the same mid section and g'box, not sure if it's same powerhead. The boat in the pic i posted parted company with that motor just prior to me owning the boat, i started out with a 25 toey on it. some blokes from sydney ended up with the motor, looks like they've got their sights set on more than the 25hp. Australian kilo record.
    good luck fella's

  6. #6
    Team Member Growler's Avatar
    Join Date
    Nov 2005
    Location
    Sydney, Australia
    Posts
    11
    Post Thanks / Like

    Default Just bolted on

    All correct Mercguy except it is an M40C bottom cowl or belly pan that has had some mods to suit our needs.

    Boatnut the colour scheme was to match the tunnel but thats tied to the roof of the garage at the moment in need of some repairs again
    Thanks for the photo that was a while ago and the motor has gone through a LOT of changes since then whole new power head back to single carby for now that is, it had its first on water test yesterday we got it bolted to voodoo (see pic of black and red mono) 90 km/h but motor too low and needs more trim (easy fixed)

    Ron will look at posting speeds the pics of the motor on its own are of the motor in its present state the pic of the motor on the mono on the water was a few years ago now but "basically" the same motor, the motor was built for 550 cc supersport class here in Australia basically anything goes as long as its under 550cc capacity, this motor "did" hold the national speed record in the late 90s with a speed of 108 km/h average over 2 km.
    Yeah that is a billet head!!!
    Attached Images Attached Images

  7. #7
    Team Member 850cc racer's Avatar
    Join Date
    Sep 2005
    Location
    australia
    Posts
    220
    Post Thanks / Like

    Default

    Growler: i saw you run last year at mildura. was great watching it hang in the air down the back straight in tandem with the other boat!!

  8. #8
    Team Member Growler's Avatar
    Join Date
    Nov 2005
    Location
    Sydney, Australia
    Posts
    11
    Post Thanks / Like

    Default I saw it too

    Gday 850cc

    I saw the same thing that you did. My mate Steve (voodoo) was behind the wheel that day. He was behind the wheel a few months later when we had the 550 motor on it and it did a similar thing at Windsor only when it came back down the ply on the side of the sponson decided to come away from the boat.

  9. #9
    Team Member 850cc racer's Avatar
    Join Date
    Sep 2005
    Location
    australia
    Posts
    220
    Post Thanks / Like

    Default

    ah! okay cool certainly a quick little boat, heading to mildura this year?

  10. #10
    Team Member Growler's Avatar
    Join Date
    Nov 2005
    Location
    Sydney, Australia
    Posts
    11
    Post Thanks / Like

    Default Mildura

    Certainly plan to, its a good weekend down there!!

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Evinrude Outboard Motors
    By Skoontz in forum Technical Discussion
    Replies: 5
    Last Post: 07-08-2014, 03:55 AM
  2. Evinrude Outboard motors
    By Skoontz in forum Outboard Racing History
    Replies: 2
    Last Post: 10-30-2006, 06:13 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •