the engin started life as a 3.3ltr ficht injection engine!
bolted a Etec front half to it
used old style large rods
custom pistons
and motec injection-ignition on it with a MAD EFI slide front
the engine pulls arround the 8,000rpm mark but could probly get some more out of it!
so this weekend we are going to try and strech her out a bit at the one up and we want to break 100mph with a skier on the back!
BRP = Better Racing Products!
Originally Posted by looseunit225
Where is the bridge to Bridge race this weekend
AS a side note Adam Whitfield aka Bullet 1650 has just hit GPS 98mph with an STV & a stock Evinrude 250HO including STOCK L2 gearcase in Sydney, Australia. Has a modified same brand prop on the way which will hopefully see him to 100mph+. These new L2 gearcases & the 250HO's are awesome. Again I'm saying ALL STOCK, no mods, no nosecones. Factory EMM Rev limited to 6300rpm.
what do you mean by a L2 box do you mean the 250 ho lightining gearbox?
BRP = Better Racing Products!
Yes. Stock Standard. 1.71:1 32" Mazco Stock.
No nose cone, nothing.
This is a fishin' motor damnit
Ken, I think Adam lives in Sydney, his brother will probably run in the powerboat race on sunday morning, 1750 bullet with a 2.5 merc on it. I wonder if Adam is racing the STV. That boat should run over a 100mph easy. Brad groves force will do that too propped up. He's hitting mid 80's with two skiers.
Anthony, have you taken possesion of Darren's boat and motor yet and racing it in Sydney or is he driving it. 100mph 1 up would be cool. Are you buying the hull and injection/ignition/motec less block or are you getting the block too. Did you ever rebuild yours after it popped?
Adams ordered a Mercury 4 blade pro et. He hopes it will work out.
nice thread but where's my 727?
anyway I'd settle for the new SeaWay F1 motor....any news on that?
Best of luck to the Brp's for the Bridge
It would have to be darn good to top Darrens Motec liveried baby's.
We will see. Very Exciting stuff.
im going up to the brisge 1 up with darren and its the last race he will be doing as the boat being his!
after than the boat is mine but the engine stays as his!
we will be racing the boat and his engine togeather for the start of the ski racing season for the sydney bridge to bridge and the grafton race next season!
by than his new boat should be ready and my new engine should be ready
i've bought the boat and will be buying the injection-ignition motec system and will be bolting it onto a 3 ltr that i have started porting out and working on!
BRP = Better Racing Products!
i run one of those gearboxes on my engine at the moment they are alright but they would be better if someone made a low water pickup kit for it!
BRP = Better Racing Products!
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Thanks: 
Likes: 
Reply With Quote
Bookmarks