Thanks Thanks:  0
Likes Likes:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: Looking For Kober Cat Pics

  1. #1
    Team Member
    Join Date
    Apr 2005
    Posts
    5
    Post Thanks / Like

    Default Looking For Kober Cat Pics

    Hi guys and gals
    I was wondering if anyone has info or pics on some boats that ran in an outboard drag racing class in the early sixties.they were powered mostly by Merc 125's. they were a 12 foot tunnel hull made by kobercat. My father and about four or five of his buddies had these hulls and would wreak havock with the jet boats on our vacations at the river (one of his buds has a cabin near palo verde/walters camp)we spent many years in this retired racer doing everything from fishing,learning to ski then my father having us boys clean out ice chests, skiis and fishing poles so he could 'woop up' on the jets that thought they were 'bad'. a lot of fond memories with this hull, I know its a long shot but if there's any pics or info I'd love to see it. the boat my father had was named Drag -N - Fly with a propped dragon fly on its sides near the transom.(dosent have to be this particular hull,btw the deck was rather concave small picklefork bow and rounded over at the rear like the flats are)thanks, this board is great.

    steve
    builder of 1/5 scale flat bottom drag boats,for nitro gas and electric.

  2. #2
    Team Member Miss BK's Avatar
    Join Date
    Dec 2004
    Location
    Indiana
    Posts
    305
    Post Thanks / Like

    Default

    I remember a boat named "Drag N Fly" at the drag races about 15 years ago, but I don't think it was a Kober Kat. Also, in the early 90's there was a copy of one of these drag boats still running on the DSRA circuit. The one thing that sticks out in my mind is that driver had to sit with his legs splayed far apart because the tunnel floor was so wide and the cockpit was so shallow.

    Dave Kober is a good friend of mine and is still building boats in Lake Havasu as of 2004. He was a fireman in LA before retiring and moving to Havasu. He used to have a website (koberkatboats.com) but looks like it is down now.

    The first boat I ever drove was a 10 foot Kober Kat tunnel, built for the mini OPC classes in the mid-80s. I soon bought one of my own. But as Mod-C grew faster and faster, a 10' boat was not enough to handle 70-80mph (I learned the hard way). That's when I bought my 12' Mirage Tom Cat.

    This is probably the model of boat your dad ran:




    Time table:
    As told by Dave Kober:

    1954 - Dave wants to build his first boat, goes out and buys 'GLEN L Plans'.
    1956 - Dave has an F-racing Runabout with a 1939 4-60 EvinRude.
    1958 - Dave builds his first 'Kat'. Everyone said 'You can't make it work with a single engine', but He did it.
    1958 - Dave started racing. He raced against V bottoms, Flat bottoms and beat them so badly they had to make a new class, the 'U-Class' "COBRA".
    1962 - The Tunnel boats of old had round noses and they were all blowing over, Dave developed the first 'pickle fork' design.
    1967 - Ted Jones asked Dave why he had that pickle fork design on his boats, Dave said it gave the boat more air and kept it from blowing over, then Ted Jones took that information and used it on his 'Unlimited Hydros'
    1968 - Dave starts building and selling 'Kober Kat' boats. He sold 138 all over the world that year. New Zealand, England, Canada, Hawaii to name a few.
    1978 - Dave next builds a 20 ft. 'Kober Kat' able to go 80 mph with a 200 hp Mercury.
    1983 - Dave builds his first 'Mini' boats, 8, 9 and 10 ft. He sold many of them for racing
    Last edited by Miss BK; 04-28-2005 at 08:01 AM.

  3. #3
    Team Member Miss BK's Avatar
    Join Date
    Dec 2004
    Location
    Indiana
    Posts
    305
    Post Thanks / Like

    Default

    Here is one of Kober's early tunnels with twins:





    Rick Hoffman (who later would be founder and President of Hoffman race boats) was one of the first drivers to help Dave Kober tweak the 8 footers for use in a new racing class called O-Nod and U-Nod (later known as Sport-C and Mod-C)

  4. #4
    Team Member
    Join Date
    Apr 2005
    Posts
    5
    Post Thanks / Like

    Default

    Thank you so verry much that is the hull pics i was looking for.

    steve
    builder of 1/5 scale flat bottom drag boats,for nitro gas and electric.

  5. #5
    Team Member Miss BK's Avatar
    Join Date
    Dec 2004
    Location
    Indiana
    Posts
    305
    Post Thanks / Like

    Default

    Are you building one to scale? That would be really cool if you are~!

  6. #6
    Team Member
    Join Date
    Apr 2005
    Posts
    5
    Post Thanks / Like

    Default

    Quote Originally Posted by Miss BK
    Are you building one to scale? That would be really cool if you are~!
    thinking about it ... like the flatbottoms you can see there are very few straight or flat surfaces, theres a lot of work involved,but as with my flats it has been well worth it.
    thanks again

    steve
    builder of 1/5 scale flat bottom drag boats,for nitro gas and electric.

  7. #7
    Team Member
    Join Date
    Jun 2005
    Posts
    1
    Post Thanks / Like

    Default Kober Kat Boats

    Steve,

    I raced Kober Kat Boats in the early 1960s with Dave - in fact - in 1965 I was lucky enough to win the Unlimited class in the California Outboard Boat Racing Association (COBRA) using Dave's boats. I roomed with Dave for a while and we worked building boats and racing on our days off from the Fire Department.

    I am in Mexico at the present time, however, when I get home to Pasadena, CA I'll forward what pictures I have. I do not have many as most were lost in one of my moves. Those were great times.

    Jim Galvin
    Last edited by mulegejim1; 06-28-2005 at 02:10 PM.

  8. #8
    Team Member
    Join Date
    Apr 2005
    Posts
    5
    Post Thanks / Like

    Default

    Quote Originally Posted by mulegejim1
    Steve,

    I raced Kober Kat Boats in the early 1960s with Dave - in fact - in 1965 I was lucky enough to win the Unlimited class in the California Outboard Boat Racing Association (COBRA) using Dave's boats. I roomed with Dave for a while and we worked building boats and racing on our days off from the Fire Department.

    I am in Mexico at the present time, however, when I get home to Pasadena, CA I'll forward what pictures I have. I do not have many as most were lost in one of my moves. Those were great times.

    Jim Galvin

    wow jim that would be great this is the hull that i'm looking for thanks

    steve welts




    builder of 1/5 scale flat bottom drag boats,for nitro gas and electric.

  9. #9
    Team Member
    Join Date
    Jul 2006
    Posts
    1
    Post Thanks / Like

    Default lost and found kober kat

    I inherited a kober kat that I'm planning on restoring. I'm just in the early days of restoring it, and, at least on the internet, have had some difficulty finding information and pictures about this "pickle fork" cat. If you guys and gals have any good sources of info I could check out, it'd be greatly appreciated!
    Attached Images Attached Images    

  10. #10
    Sam Cullis Mark75H's Avatar
    Join Date
    Nov 2004
    Location
    Annapolis, MD USA
    Posts
    1,795
    Post Thanks / Like

    Default

    Quote Originally Posted by doctorsnooze
    If you guys and gals have any good sources of info I could check out, it'd be greatly appreciated!
    Refer to post 2: http://www.boatracingfacts.com/forum...95&postcount=2
    Since 1925, about 150 different racing outboards have been made.


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •