Thanks Thanks:  0
Likes Likes:  0
Results 1 to 10 of 10

Thread: sst 45, need advice !

  1. #1
    Team Member SUPERGLUE EXPRESS's Avatar
    Join Date
    May 2009
    Location
    Oceanside, Calif.
    Posts
    36
    Post Thanks / Like

    Default sst 45, need advice !

    located a 1995 50 HP evinrude short block (with flywheel) for 200 bucks.
    will it work for sst45 and is it a decent deal ?

  2. #2
    Administrator Ron Hill's Avatar
    Join Date
    Nov 2004
    Location
    Tustin, California
    Posts
    3,407
    Post Thanks / Like

    Default No, Bad Deal...for 45...

    45's are mid 1980 motors...Powerheads aren't the expense.


    A 45 Racing gearcase to build from parts is $1,700.

    A 45 mid section is between $1,000 and $1,500

    Legal 45 rods are $400 a set


    Trim ram is $300, not counting the trim motor...

    You need black black with a single lifting ring (One bolt) (40 to 60 HP).

    If it isn't a 60 HP, you'll need a set of carbs. ($100 to $300)..

  3. #3
    Team Member SUPERGLUE EXPRESS's Avatar
    Join Date
    May 2009
    Location
    Oceanside, Calif.
    Posts
    36
    Post Thanks / Like

    Default

    Thanks For The Info Ron

  4. #4
    Administrator Ron Hill's Avatar
    Join Date
    Nov 2004
    Location
    Tustin, California
    Posts
    3,407
    Post Thanks / Like

    Default I'll Help Get A 45

    I probably have enough 45 stuff to start my own series....

    Let me know your plans...I'll work with you!

    AND I'd bet Bill Reiter (Rillo22 here) will help you too! I know Pop Curtis has tons of stuff too! (Boat990 here)...

  5. #5
    Team Member SUPERGLUE EXPRESS's Avatar
    Join Date
    May 2009
    Location
    Oceanside, Calif.
    Posts
    36
    Post Thanks / Like

    Default

    thanks ron, i will let you know my plans at the long beach race next month (will you be there ?)
    do you know if parking for motorhomes will be avail. ?

  6. #6
    - Skoontz's Avatar
    Join Date
    Apr 2006
    Location
    Encinitas, California
    Posts
    581
    Post Thanks / Like

    Default

    Quote Originally Posted by SUPERGLUE EXPRESS View Post
    thanks ron, i will let you know my plans at the long beach race next month (will you be there ?)
    do you know if parking for motorhomes will be avail. ?
    Longbeach is one of the most fun and best venues we have, but, alas, the parking and pit area sucks as far as room would be concerned. They will jam them in so tight that crew vehicles are limited to I believe one per race boat. So, best find a room somewhere and commute to the course.
    Bill Schwab
    Dirty Deck Brewing
    Company

  7. #7
    Team Member
    Join Date
    Sep 2008
    Location
    Singapore/Melbourne/Italy
    Posts
    780
    Post Thanks / Like

    Default

    Ron

    what was the reason the 45 class has lasted longer and larger then the 60's?
    Has anyone got a large stash of 60 parts...like gearboxes?

  8. #8
    Administrator Ron Hill's Avatar
    Join Date
    Nov 2004
    Location
    Tustin, California
    Posts
    3,407
    Post Thanks / Like

    Default In Souther California....

    Three reasons I see 45 being a real class in Regions 11-12...

    1. Sea-Way Marine, Greg Jacobsen, had the fore sight to buy the rights from OMC on parts, and then build and stock parts.

    2. Bill Curtis did,does and will build you a good motor, fix you parts, help you all at very reasonable rates

    3. RJ West, Warren West, Steven Dawe, Spence and Shawn Love, Chad Hill all raced Stocks when they were kids...Dean Wilson, Steve Wilson and Kevin Curtis have raced the calls off and on since it started, most have raced since 9 years, over twenty years...Jason Williams' dad raced...John Lanes' dad raced....Chuck Skelton raced himself...You know when you go to a race there will be boats to race against...Most 45's are "LIFER RACERS" meaning this is a sport they will stay with for life..Thomas Lieby's dad and Mom both raced...Joe Brain switch from Ski Racing...

    4. Revolution builds a cool looking boat for a fair price. And before that, a Gran Prix was and is a cool boat. Jason Williams seems to win with his, still!

    5. Roger Carr has kept a close eye on motors being legal.

    6. Having a Series that races with the larger inboards has been good, too.

    7. It is a good class, all the safety equipment we can get our hands on, speeds aren't too fast...not too hard to work on, easy to transport...

    Running 45's with kneeler isn't easy as 45's require divers...

    The APR has raced SST 60 for years and still gets good fields...

    Not SST 60 gearcases around that I know of. That is why I make a nose cone for the nitro case, you can make a "POOR MAN'S" SST 60 case!

    Just my thoughts.....
    Last edited by Ron Hill; 07-07-2009 at 09:51 AM.

  9. #9
    Team Member
    Join Date
    Aug 2009
    Location
    Florence, South Carolina
    Posts
    56
    Post Thanks / Like

    Default POOR MAN'S" SST 60 case!

    Att: Ron Hill.

    I need one of your nose cones for a nitro case.

    Building a river boat for my nephew to run here in South Carolina.

    Motor will be 45" w/ nitro case. nothing really fancy But I would like to make a few mods to the engine. ie finger ports, head, tuner etc. flat bottom fiberglass boat w/ small pad. Any sugestions you can give will be greatly appreciated. I have experience w/ 49" 3cyls but that was 25 years ago. so kinda rusty.

    Please post info on where to call & get nose cone kit please.

  10. #10
    Team Member Sam La Banco's Avatar
    Join Date
    Aug 2006
    Location
    Northbrook Il.
    Posts
    45
    Post Thanks / Like

    Default

    The main reason the SST60 class dwindled down, was because the people running the OMC series and race program never pushed the 60 class.

    There was vested interests in both "45" and the now dead "100" class. Both were promoted to a much greater extent.


    Also, because in the begining of the "45 " program, it was raced at many stock outboart races as there was both a 45 SS stock class and a SST45 OPC class.

    I believe if some of the people that race "45" motors got a ride in a good "60" boat, things would be a bit different.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Help - Need advice Re crossflow compression
    By Bruce G in forum Technical Discussion
    Replies: 4
    Last Post: 06-17-2009, 03:30 AM
  2. Looking for some advice
    By scott5sp11 in forum Technical Discussion
    Replies: 17
    Last Post: 08-29-2008, 07:37 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •