hi all,

todays discussion is the heads. on cly 2 and 4 it looks like something got loose in there and pitted the aluminum. the question is would it be wise to habe the heads skimmed off to make them smooth and also take out the same amount out of the bowl(sorry not sure what to call it). this way yhe cc's will not change and the compression should be equal on each cyl. i trust the advise i have received here and would like to do this if it will be wise. it looks like about .002 or .003 will be skimmed off. if nothing is done will this have any adverse affects on the compression? after the decision is made on the skimming the true polishing will take place on the heads. worked on the edge and it looks like stainless.

frank