I know what you mean, 23" p, 5600 rpm, 59.5 rpm, 1.86 to 1 gearcase, If my calc. is right that works out to about zero, no.....Impossible, if so, can you Imagine when I put real power behind this wheel? Nah that can't be right.
I know what you mean, 23" p, 5600 rpm, 59.5 rpm, 1.86 to 1 gearcase, If my calc. is right that works out to about zero, no.....Impossible, if so, can you Imagine when I put real power behind this wheel? Nah that can't be right.
What motor and boat?
Since 1925, about 150 different racing outboards have been made.
i have two props identical, 23 long tube cleavers. only difference one has been thinned one hasnt, the thinned prop does 75mph all day long.
the thick one was only good for 73.2
The 76 stinger I have has of course, the nitro. The prop is correct as the builder is reknown. I feel I need more diameter. But those props are few and far between, just look at all the postings on this website for 12-12 1/2 X 23-24" props folks are trying to hunt down. Not and easy task since they are still running them in classes.
I would love to try a 12X24 13 spline if there is one out there on a shelf collecting dust. 7200 is about all I want to go, even thouigh it is nothing for this engine after the rebuild.
No, it doesn't automatically mean the prop pitch is correct. Even if I made the prop myself, I'd say it still doesn't work as marked/hammered.
Since 1925, about 150 different racing outboards have been made.
[QUOTE=marchettih2o;116752] But those props are few and far between, just look at all the postings on this website for 12-12 1/2 X 23-24" props folks are trying to hunt down. Not and easy task since they are still running them in classes.
I would love to try a 12X24 13 spline QUOTE]
There are plenty of these props available. I own many of them. The problem is nobody that I've responded to wanted to but a prop. They all wanted to try a prop or get information.
Jeff Titus, and others, builds them new on a regular basis for the SST60 racers.
Sounds Great! Please email me what you have in the 12 - 12 1/2 X 24" catagory...three blade solid hub cleaver. Photos would be nice as well
You can get me Sam, at ggusta@tx.rr.com..thanks, george in Texas
They just had a 23p on ebay, buy it now for 150.00. I have the guy saved if you want it, it went off unsold two days ago.
Helping folks out around the globe.
There are currently 2 users browsing this thread. (0 members and 2 guests)
Bookmarks