Think I've got it all the way back right now. May just need to check the cables again see if they are still tight or kick back the idle timing
need a video and some pics of this engine and boat to see how she looks and sounds now.
pictures can sometimes be realy cool to look at and may possibly help others to help you !!!!!
Hey guys, I am curious what cutting the tuner does and what is meant by adding a bell! Does this give hole shot or top end ?
tuner are all the same, i have try all kinds even elbow shape. it's all in what you like the best. the factory has spent a few bucks on tuning, i now run a factory tuner..
out front again
The longer the tuner is the more low end you'll have and the shorter (to a point) the more top end rpm you'll have. I cut mine because everybody's I know is cut some are belled some are just cut and flared and a few I've heard are built like a cone with the factory tuner cut from the exhaust plate and welded the cone on. Don't know how much power they add but it sounds good so I'm gonna keep it! Lol. My motor is running really good and starts right up even in 19 degree weather and runs all day long duck hunting. I'm sure with a little more setup and a racing wheel it'd run over 50 with a full load ran 45 this morning with 2 250 lb guys, 4 dozen decoys, waders shells and all our other junk and that's with a factory Merc 15 p vengeance.
wouldn't know about 19 degree starting don't know anybody krazy enough to be on the water, unless you picking up frozen mullet ..lol ps everybody with a 59 in merc are happy happy happy
out front again
Yeah I'm one of the happy owners! The 19 degree crank right up makes it even better. Hopefully it gets colder and I can stretch it out some more after those ducks!
Well I got 3.8 hrs on her now. If I could get someone to come with me I would take a video to post up! Gonna try to make that happen over the holiday. She's runnin good but I still Havnt stretched out any of my speed props. Gotta warm up to her. Ran my 16p 54mph today, might coulda got a little more out of it but it's prolly a little soon to run it that hard. Took off my bobs sb4 and put the sb6 on it. Setup I believe is finally about rightAttachment 55711
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks