Thanks Thanks:  0
Likes Likes:  0
Page 1 of 3 123 LastLast
Results 1 to 10 of 22

Thread: Multi Cyl into one exp chamber

  1. #1
    Team Member
    Join Date
    Sep 2008
    Location
    Singapore/Melbourne/Italy
    Posts
    780
    Post Thanks / Like

    Default Multi Cyl into one exp chamber

    Ok I know you can have 2 cyl into a single chamber as per seadoo's and ski doo's
    but can you put 4 or 6 cylinders?

  2. #2
    modifiedoutboard OUTBOARDER's Avatar
    Join Date
    Sep 2008
    Posts
    209
    Post Thanks / Like
    ANTHONY McCULLOCH
    modifiedoutboard@hotmail.com

    Some things never change!

    They Want it cheap..............

  3. #3
    Team Member
    Join Date
    Sep 2008
    Location
    Singapore/Melbourne/Italy
    Posts
    780
    Post Thanks / Like

    Default

    Thanks for the find.
    but 2 1000cc sled engines joined is almost double that ( with pipes that is and emission compliant)

  4. #4
    Team Member
    Join Date
    Jun 2005
    Location
    Eastern PA
    Posts
    661
    Post Thanks / Like

    Default

    Pretty sure you have to have pairs and multiples of pairs. In this case, 3 into 6 would work.

    Jeff
    "We live at the bottom of an ocean of air." - General Marvage Slatington

  5. #5
    Team Member
    Join Date
    Sep 2008
    Location
    Singapore/Melbourne/Italy
    Posts
    780
    Post Thanks / Like

    Default

    Quote Originally Posted by Fastjeff57 View Post
    Pretty sure you have to have pairs and multiples of pairs. In this case, 3 into 6 would work.

    Jeff
    there are plenty of seadoo things with 3 into 1.
    I found a couple of bike threads with people looking for data to build 3 into 1 for the old Kawa's and Suzuki's. All they said was less peak power than 3 singles
    Maybe 4 into 1 only works with a megaphone as OMC set a world record with?
    I guess 77 140's have a 4 into one megaphone.
    I guess there is very little data on 4 cyl as there are not many ( less GP 500 bikes with 4 pipes and tons of HP)

  6. #6
    Team Member
    Join Date
    Jul 2014
    Location
    Bowden Bend, Arkansas
    Posts
    11
    Post Thanks / Like

    Default

    Due to the increased size of the common header(for volume) the pulses at the exhaust port are weaker....But with enough time and $$$ (testing) they will work.

  7. #7
    Team Member
    Join Date
    Jun 2005
    Location
    Eastern PA
    Posts
    661
    Post Thanks / Like

    Default

    .."there are plenty of seadoo things with 3 into 1."

    Correct. I shouldn't have used the word "pairs". But the pulses must be in a proper sequence, and 6 into 4 chambers is not.

    Not
    "We live at the bottom of an ocean of air." - General Marvage Slatington

  8. #8
    Team Member
    Join Date
    Sep 2008
    Location
    Singapore/Melbourne/Italy
    Posts
    780
    Post Thanks / Like

    Default

    Quote Originally Posted by Fastjeff57 View Post
    .."there are plenty of seadoo things with 3 into 1."

    Correct. I shouldn't have used the word "pairs". But the pulses must be in a proper sequence, and 6 into 4 chambers is not.

    Not
    Would you run 4 pipes into one then into the divergent cone or 4 pipes into the cone so look like a 4 stroke header collector?

  9. #9
    Team Member
    Join Date
    Jun 2005
    Location
    Eastern PA
    Posts
    661
    Post Thanks / Like

    Default

    Absolutely. A zillion V-8 race car engines use that setup.

    Jeff
    "We live at the bottom of an ocean of air." - General Marvage Slatington

  10. #10
    Team Member
    Join Date
    Sep 2008
    Location
    Singapore/Melbourne/Italy
    Posts
    780
    Post Thanks / Like

    Default

    Quote Originally Posted by Fastjeff57 View Post
    Absolutely. A zillion V-8 race car engines use that setup.

    Jeff
    If it was a zillion v8 two stroke race cars I would have some data to work with hence the question.

Thread Information

Users Browsing this Thread

There are currently 2 users browsing this thread. (0 members and 2 guests)

Similar Threads

  1. Universal [MULTI-MAKE] 12 inch Mids and gearcases
    By Hounddog in forum Technical Discussion
    Replies: 1
    Last Post: 04-17-2014, 07:49 AM
  2. Ex.Chamber Science
    By Tomtall in forum Technical Discussion
    Replies: 30
    Last Post: 09-21-2010, 12:47 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •