Hi - I'm new to the site and was wondering if anyone had info on the Marchetti race boats. I
have one and am in the process of bringing it back to life. Its 10' long
Hi - I'm new to the site and was wondering if anyone had info on the Marchetti race boats. I
have one and am in the process of bringing it back to life. Its 10' long
Hello,
Early 1960's would have a cloth front deck....... Later 1960's would be an all wood deck.
At 10' long, it would most likely would have been a B Stock or C Stock or maybe an A or B Alky boat.
A picture would help.
Best of all, no matter what, I will be a cool restoration project.
All the Best,
Dean Hobart........................................
Dean Hobart
Had a 11 ft Mar****ty..Leaked from day 1..Had it back to Nick 4 or 5 times..he said it was worm holes !!!! Ran A & B alky on it
The O.P. is evidently new to all of this, and we ought to get him clued-in a little bit.
DennyJoe, over the years and decades there were lots of boat-builders, from do-it-yourselfers just building their own hull (often from someone else's plans, sometimes from kits) to those who made their living or part of their living at it. And over the years, at any given time there was usually one, maybe two big names, boat-builders who sold their outboard hydros or runabouts all over the country. In the Thirties and Forties I believe it was Jacoby, in the early Fifties, Neal. By the mid-Fifties, Joe Swift of Florida was turning out hydros on a production-line on a scale unmatched before or since, as far as I know (all of this is subject to correction). From the late-Fifties to mid-Sixties, Sid-Craft in New Jersey was the big name in hydros; they built a lot of runabouts as well but not as many as the long-time runabout king, DeSilva, in California. But the Sids never had their own way, and had to battle it out with the other big name in hydros in the Sixties, Marchetti. Nick Marchetti built the whole range of hydros from A Stock to F Alky, and his boats won plenty of championships. I was a little local-area mid-pack racer in those days, and had a couple of Marchettis for a little while each, a 10' 2'' for BSH and AOH, then a 10' 8" for AOH (what is now more sensibly called 250ccHydro). Both were a little heavy, and I never liked the look of Marchetti's rather low non-trips. But neither boat ever bit me or did anything scary, and I had boats I thought were better that did both!
So DennyJoe, you have a real period-piece there. I'll caution you that like a lot of racing outboard hydros, it's not the kind of playboat that you can bounce over cruiser wakes, and if you try to run over any sort of swell or rollers, you'll soon be contemplating your error. Light flat chop on the lake is what you want, and with that and a light 20-25hp motor and a "speed" prop, you'll have a great time. Best idea is to cartop the boat to a local race (the various organizations post their schedules on this site or www.hydroracer.net ). You'll get lots of info from the old-timers on fixing up the boat, and on engines and props and set-up.
To the old-timers, maybe we ought to have the thread devoted to creating a historical time-line showing what boats, Stock and alky, hydro and runabout, were being used in what years and decades. Not only the big names (am I right in thinking that Krier "owns" the alky runabout classes today in the way DeSilva used to?), but the mostly regional boats (in the Northwest, Karelsen, Ron Jones, Foti, Goff, R&D, and Price-Craft as examples from my day) as well.
In the late 60's, I was impressed with Dick Summerfield's boat selection. At three different ( maybe even consecutive ) races, he showed up with a C and a D Marchetti, C&D Sids and C&D Castas. He always ran well and the make of boat didn't make much difference.
Smitty - Very well said and Im sure that is exactly what info he needed. Someone here or Hydro racer as Smitty gave you the link above maybe able to guide you to a person/persons that can help you. He also gave you perfect advice as to conditions to look for to run your boat when your at that stage. Will add always have another boat available to assist you if you need but thats down the road for now Im sure. Good luck on your project and look at the other site and ask there as well.
Smitty - Yes Krier runabouts are probably the most used in alky racing or that style and Derek Gessler makes them as well.
If you could post some pictures Dennyjoe2, then the whole power of BRF could come down and nail down, or get close to the Marchetti you own. You've got stock, alky and mod guys here that know what they're looking at. If you have a boat number and or colors.....you may get some really good history on your boat.
Aroune 1963, I drove Roy Miner's B Marchetti at Kingburg, California (Fred Hauenstein's home town) we raced around an island. The boat had a tapered cockpit, wide by the steering wheel. I got a good start on the inside and led til the end of the island. I got to the end of the island, no buoys, just island, I climbed forward and turned it like a chine turning runabout. Ted May had got real wide thinking I'd slide out, when he saw what I did, he cranked it hard left and ran on the island and up the bank and he and landed in a tree. I won the heat and the race. Ted came in mad as hell, both of his knee pads were filled with mud. I said, "How come you ran into the island? He just started muttering! I was at Essex, Maryland, Stock Nationals 1967. I was looking to borrow a Sid Craft C or D Hydro as I had been on the road all summer and my Sid was back in California. Nick Marchetti wanted me to try some boat he guaranteed me I'd win D Hydro with it. I checked it out and tried to lift the bow....it weighed more than my whole Sid-Craft. I borrowed Buzz Gotfried's Sid and ....that's another story.
Several of the big-time hydro builders of the '50s-'70s offered hulls for ASH and BSH, and an in-between size they called an A-B hydro. IIRC, these in-between sized boats were offered by Swift, Sid, Marchetti, maybe Hedlund, and Craig-Craft. And as I remember it, some of the fastest guys in BSH used these smallish boats. Jeff Lowe, who could beat anybody in Reg. 10 and set the competition record, had an A/B Marchetti he'd bought from Mike Jones, who had run it in ASH. A few years later, Jan Christ used a little A/B Craig-Craft to blow past everybody. Both of these guys were also were top-notch drivers. Both were physically a little bigger than the ideal size to be on minimum weight, so maybe that's why they went with the small boats. As for nose-heavy Marchettis, Ed Karelsen was already building hydros with spliced bottoms in his early-'60s ASH boats; the usual 1/4" plywood spliced to a piece of 1/8" plywood forward of the sponsons to keep the front-end light. By the mid-Sixties Ed was doing this with bigger classes. I don't know whether any of the other builders ever did this, but I don't think Marchetti did.
All this is a long way of saying to the O.P. that when you measure your Marchetti, tell us the exact length overall, as well as the length from the back edge of the sponson to the back edge of the bottom, what's called the "afterplane" length . . . roughly five feet for your boat, but give an exact measurement and the old guys who aren't as Altzheimered as me can tell you if your boat is and A, a B, or an A/B.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks