I "could've" been doing my dishes .... or my laundry... or fixing the broken clutch diaphragm in my dirty S-15 ..... But NOOOOO . Ron posts a picture of that shiny OMC tower and all I wanted to do was take off some of the "pointy things" .
Now I have to do "something" with the clamps ( you just CAN'T put this on a set of ugly clamps ) I found something else "interesting" while I was
cogitating ( I think that means staring at something with a blank,really blank in my case lately, mind )
THe Polaris and Rotax bolt pattern are the same but the bolts are different size ( 7/16 vs 3/8). The crank centers are different . So ........ with some bushings and the proper spacers you could run either on this tower .
This could be even better than I thought when I started this .
Will
Bookmarks