Randy put some of the pictures u got upstairs on SHOW US YOUR BOATS,enjoyed talking with ya.What every happened to Buddy Bakers boat(tunnel)that should be a quick ride with a 3 cyl omc (john/rude) Tell Ann hello See ya
Randy put some of the pictures u got upstairs on SHOW US YOUR BOATS,enjoyed talking with ya.What every happened to Buddy Bakers boat(tunnel)that should be a quick ride with a 3 cyl omc (john/rude) Tell Ann hello See ya
FF I got the 70 carbs on my 50,gained aabout 500 rpm,but took it forever to get there and very sluggish taking off. We cleaed them good and put kits in them. They have 150 jets in them now,can you tell me if that's to big and if so what size I should try?The plugs wre dark brown to black,but did not check them untill the next day. Also the 50 carbs were 25mm throats,do you know what size the 70s are? Got the freinds with stingers total attention.
Thanks Fred
145 main jet, that will dry out the mix. i don't know what size thay are.
when you open the throttle, this is what ya want to happen in order for best results. when ya hit it, carbs crack open Then All the timein advance drops in then the carbs go to full, full blast. loose the choke plates
who said you can't do anything with them i picked up 8 mph with a different tuner and rasing the exh ports beside the fact it was on 100ml of meth to 10ml of acetone what a brew haha any other ideas not bad for a motor with no cyl head welding crank this week any othe ideas?
i also got a 31m vander velden complete motor if ya kno anyone in f3 looking to smoke the field haha take it easy guys
the 31m is about 1110cc this motor was originally avgas then we took to it with some methanol then went back to avgas but on my f3was capable of 102mph
How popular is F3 in Australia?
Since 1925, about 150 different racing outboards have been made.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks