Sometimes theres a wire to snip that eliminates a limiter but Im not familiar with it. The aluminum props are part of the problem, A surfacing prop is what that needs but even then it would cavitate unless you got a drag race prop. By the time you spent that $$$ a trade out for more hp would be better. Either way to meet potential you'll need to test prop[s] & set up. Aluminum's performance prohibitive because the thickness the blades need to be to be strong enough is a problem. Stainless at about 5X stronger, can be thinner so is all kinds of improved for the same prop for that alone. Good Luck
Bookmarks