I need help with adding power trim on a 75 HP Johnson Stinger with 15" Mid. Has anyone done this and what do I need to do it???? Help PLEASE 603-568-4166
I need help with adding power trim on a 75 HP Johnson Stinger with 15" Mid. Has anyone done this and what do I need to do it???? Help PLEASE 603-568-4166
1998 STV Euro JSRE 260
11 1/2' Tunnel 60HP Evinrude
1942 Century 17' Sea Maid Barrel Back 175 HP Flathead 6
2004 Moomba 23' Mobious XLV 340HP
The SST 60 parts fit.
You need to contact Seaway Marine in Seattle
http://www.sea-way.com/
I am working on an late model fastrak trim version with an exhaust housing cut down with solid mounts to create a 15"
It will need wing bar steering
I wont have a product for a few months so no help until then
I have done it, see my posts here
http://forums.fiberglassics.com/g3/
Posts done on July 22, with most posts labelled yamarude. Start at bottom and work up
Just use the clamp ears and pivot tube off of a1990or newer 2cly jhonson use your pivot arm and bottom mount clamp off the stinger then you can use the thru tube steering and the new eTech trim will fit.you will want to buy the soild lower mounts from sea-way the sst60 ones are the ones you want but you dont need them.This hole set up can be bought new and the part numbers are out there. No need to junk up a jhonson with yham parts
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks