PDA

View Full Version : hydro stream complete



50hptiller
08-23-2010, 06:35 PM
well it made its maiden voyage,i still need to do a little carpet work and nic-nac stuff. pop took the critchfield me and the wife took the stream, put the big wheel on it. it is a different animal since the pad and bottom job, hops like crazy till u get it on the pad then you could drive it with one hand. we only got to race once and now i got a few knots on the back of my head. i lost and got beat up.

50hptiller
08-24-2010, 03:32 PM
not to fast though
<object width="480" height="385"><param name="movie" value="http://www.youtube.com/v/dU6l8Bjx7v8?fs=1&amp;hl=en_US"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/dU6l8Bjx7v8?fs=1&amp;hl=en_US" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object>

lil_armond
08-24-2010, 04:06 PM
Looks good, and it looks like the dash piece came out good as well. Let me know when you are ready to fab up a nice aluminum control box for it and we will make it.

MWhite
08-24-2010, 04:20 PM
not to fast though
<object width="480" height="385"><param name="movie" value="http://www.youtube.com/v/dU6l8Bjx7v8?fs=1&amp;hl=en_US"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/dU6l8Bjx7v8?fs=1&amp;hl=en_US" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object>
Cody, thats a nice rig, looks good, but is that your dad in your boat, cause it looks like hes smokin your u know what, lol sorry bout that, i couldnt help it.

50hptiller
08-24-2010, 05:56 PM
he was all smiles, ran out all my gas...... i think he is gonna be the driver of that one now. it will cut almost 100 lbs by the time we are done. gotta get ready for the next get together

fastest aluminum boat in lousiana
08-24-2010, 05:58 PM
looks good!!!!!

seapro
08-24-2010, 08:53 PM
Ya ready for some 1000 foot drag

Craig Wayne
08-25-2010, 10:10 AM
well it made its maiden voyage,i still need to do a little carpet work and nic-nac stuff. pop took the critchfield me and the wife took the stream, put the big wheel on it. it is a different animal since the pad and bottom job, hops like crazy till u get it on the pad then you could drive it with one hand. we only got to race once and now i got a few knots on the back of my head. i lost and got beat up.

Looks good Cody.

seapro
08-25-2010, 12:05 PM
Like the RED

50hptiller
08-25-2010, 02:52 PM
i figured if i painted it red it would haul ***......... i dont think its the color that matters...lol

MWhite
08-25-2010, 06:42 PM
i figured if i painted it red it would haul ***......... i dont think its the color that matters...lol
You thought if it was painted red,,, it would run like little red didnt you. LOL

man of many boats
08-28-2010, 09:26 PM
it never did hopp like that when i had it it did have sum trim tabs on it but i also had a bobs case and a 24 pitch wheel on it but congrats it looks great

50hptiller
08-29-2010, 08:09 AM
it never did hopp like that when i had it it did have sum trim tabs on it but i also had a bobs case and a 24 pitch wheel on it but congrats it looks great

i took the tabs off, it did ok and after the square pad it wonts to hop. you put you foot in it and it runs beautiful. it just has to be tucked under a lot to cruse around. i am still playing with weigh distribution to see if that helps. i am going to put a bobs cavitation plate on it in a lil bit to see if that helps. i am running a 26p merc chopper. you ever try a cleaver on a viper? i was think of trying one to see if it will help with the hopping, it makes a big diff on my green boat......this is my first time playing with a viper.

ima75man
08-29-2010, 08:13 AM
cody down here, a hoss cut prop works great on a viper.with the bottom samiler to yours.

man of many boats
08-29-2010, 11:52 AM
i had a yammy copy it worked good

50hptiller
08-29-2010, 05:33 PM
ran it today, can put it on tha pad and cruz at about 40 mph. runs beautiful, i think i got it. it runs dry dry dry now. i didn't like it too much a few days ago but i love it now.

88workcar
08-30-2010, 06:38 PM
cody down here, a hoss cut prop works great on a viper.with the bottom samiler to yours.

Shut up old man, how you know what I got in the wood shed anyway, quit telling people. Nice pretty little ol 26p that needs a home