PDA

View Full Version : '59 Mercury Mark 35a / 55H quickie



Ratherman
05-14-2011, 03:11 PM
Can someone confirm if a 55H quickie will bolt up to a Mark 35A? We are looking to put a motor together to play with - if so, we would be in the market for a 55H complete lower unit/tower. Any leads appreciated!

Thanks,

John R.

Aeroliner
05-14-2011, 03:46 PM
Should fit right on. You will need the throttle hookup and you will be in good shape. A good complete quicksilver lower unit could run close to $1800 with the lower pan and bar, sometimes more. It could be cheeper in the long run to buy a complete engine. At times they go in the low $2000 range and you might get a prop and bar in the setup.
Alan

Mark75H
05-14-2011, 04:53 PM
Sometimes less pretty ones hit eBay a little over $1,100 or so. I've seen D Quickies by themselves in the $800 often.