PDA

View Full Version : 13' Twister Craft 150 Merc



moomba
09-24-2011, 01:49 PM
Here is a 1980 Twister Craft 13'. These were splashed from the MX 13 Checkmate hulls. This had Mercury Twister on it when it was new. Now it has a Stock 150HP Power Head
T2 mid and a Speedmaster lower with a NOS set up from Land and Sea. I had Ronnie in LI make the Fiberglass drop on Cowel with Modified pan as it never had a cowel with this powerhead. Allways been garaged. Not a scratch on the hull. It was used to drag race in its early years. I have only run it a couple times. Having problem with ignition breaking down around 4500 so I have orderd a CDI Ignition for it. Hope to get out one more time to see how it really goes. Here are a few photos.

http://i289.photobucket.com/albums/ll213/1moomba/Twistercraft/000_0013-3.jpg
http://i289.photobucket.com/albums/ll213/1moomba/Twistercraft/000_0021-4.jpg
http://i289.photobucket.com/albums/ll213/1moomba/Twistercraft/000_0016-2.jpg
http://i289.photobucket.com/albums/ll213/1moomba/Twistercraft/000_0012-6.jpg
http://i289.photobucket.com/albums/ll213/1moomba/Twistercraft/000_0011-9.jpg

KG4
09-24-2011, 03:36 PM
Awesome!!!

curbman
09-24-2011, 06:47 PM
Very nice looks like a lot of fun,

Popa Sam
09-25-2011, 05:45 AM
Beautiful rig!!! FYI the mid is T2, not T2X.

moomba
09-25-2011, 05:54 AM
Beautiful rig!!! FYI the mid is T2, not T2X.

Ops Fixed it. Thanks