PDA

View Full Version : removing thermostat



Nason
03-29-2012, 04:17 PM
Is it better to leave the thermostat or to remove it if running motor high on transom and turning between 6500 to 7000 rpms?

sheuninck
03-29-2012, 04:29 PM
120 degrees is to avoid salt buildup. prime temperature is hotter 180+

88workcar
03-29-2012, 05:26 PM
A cold engine will wear it self out.

BRzuki
03-29-2012, 07:07 PM
88, what do you mean a cold engine will wear itself out?

Where can I find a hotter thermostat for a 40 merc?

sheuninck
03-30-2012, 03:37 AM
i found an automotive one that fit the omc

calvin
03-30-2012, 04:26 PM
Which auto therm is that?

sheuninck
03-31-2012, 03:07 AM
actually i cannot remember which one it was. this was back in the lat 80s. i do remember opening a few boxes at the auto store to find one that matched the diameter and depth for the 49ci omc.

88workcar
03-31-2012, 07:16 PM
88, what do you mean a cold engine will wear itself out?

Where can I find a hotter thermostat for a 40 merc?

All I know is that the fishermen here that pull the stats wear a motor out way faster than those that don't. A motor has to be at temp to make power. I run 1 1/2" above the bottom, with a factory stat.

Fastjeff57
04-01-2012, 04:35 AM
Running at low speed, as the fishermen tend to do with all that trolling, keeps the motor too cold. That damages the pistons/ rings/ walls/ etc. Hard running keeps her warm enough to avoid that.

Jeff