Prop for 8 splined shaft Merc 20 Hp

[merc69]

HI

Searching for brass or stainless steel prop for my racing machine.

Merc 20 Hp Model 200. Old type engine

Two blade
8 splined shaft or with out.
573 lbs Total weight of deep V-type boat.

Were to find a seller / web page.
Any one tried 3 blade ?

[propfxro84]

What year? stock lower unit? If you have a prop that fits the motor can you post a pic? Thanks

[Fastjeff57]

You'll probably have to adpat one, as this gentleman did. Note that it's not a thru-hub prop, but it planes off just fine.

Jeff

[merc69]

Hi Jeff

I have tried to reach Ron but no reply....

So you will sell this to me :) ?

As you maybe know i took the 8 splined sleeve from a standard al prop rubber bush. Melted rubber off and inserted the sleeve into the steel prop.

Mike

[Fastjeff57]

Sorry to confuse the issue, but I don't own this prop--I kept a photo of it for info (and inspiration!)

I run FrankenMercs (larger than stock P Hs on Mark 55 type towers) so I have to build my own props. (Sorry, Ron; I'm on a budget!) After making several of them, I've learned how it's done (as have you, apparently).

There's a stainless prop on eBay at the moment that might ber what you need.It's a simple, two bladed RH deal that's about 8 1/2 " OD.


Jeff