PDA

View Full Version : 90 yamaha



mikeymike
11-22-2014, 06:57 PM
How much hp can you get out of a 90 yamaha with and all out build..
port job shave heads and all the goodies.etc

champ20B
11-22-2014, 07:18 PM
How much hp can you get out of a 90 yamaha with and all out build..
port job shave heads and all the goodies.etc

Well, if its a two stroke you're referring to, then its a 70cid engine. Running on gas and just being a hot-rod build up, not adhering to any tech rules administered by a racing organization, you could probably get up to 150 or more. Many jet ski engines get about 1.75 to 2 hp/cubic inch, which are two stroke, so the same could possibly be found in a later loop charged outboard. Whether it will hold up to it is another issue though.

Roflhat
11-23-2014, 03:19 AM
Think Hydrotec build them to 120hp reliably, I read that somewhere on here. They got the port map direct from yamaha

Fast Fred
11-27-2014, 07:10 AM
the stock carbs are small..............

Fastjeff57
11-28-2014, 04:30 AM
So are the reeds. The 40 twins up to 90 triples all used the same 6 petal reed cage.

Jeff

88workcar
12-06-2014, 02:38 PM
Carbs are fine, don't waist you time and money on Hydrotech on a 90 Yamaha. 7500rpm and all the power you want.