PDA

View Full Version : Desilva Delta from mid-1980's How many are left?



25XS
08-01-2017, 12:45 PM
Wondering how many Desilva Delta runabouts are still out there. I know of three... (now four!)

C-5 is in Gainesville, GA and is shown in the pictures below.

This one is in Indiana and was the subject of this old BRF thread:
http://www.boatracingfacts.com/forums/showthread.php?7713-desilva-delta-wing

One more is in Georgia and I'll edit this thread to add pictures of it here.

A fourth boat is in Prop Riders Racing's shop as mentioned in a posting below.


It may be worth a trip to Hiram, GA to chat with Ralph and see if the production numbers and original owners can be listed. I'm curious what speeds could be expected from C-5 if it's powered with a 44XS engine..?

Steve Litzell
08-01-2017, 03:32 PM
Tom, that boat had several different Konigs on it from 500 cc to 750. Those boats where made for Pro racing. I had a lay down version. Don't know where it went now. Brinkmanship had one that used a Yamaha 500, and Kugler had several stored in his warehouse in Illinois. I think he even tried one with a A and B motor( 250 and 350). They were outlawed very soon but I think maybe a half dozen or so where made. Yellow boat in picture was Tom Goldstones that Bill Rucker drove. I tested one with a 45 sis motor with DeSilvas at second effort before the motor was released to public.

Yellowjacket
08-01-2017, 06:51 PM
i saw one for sale at the AOMCI meet in Constantine Michigan some years ago. I'm thinking it was 2012 or 2013. It looked very much like C5 in that it was in natural wood, but it was pretty rough at that time. It was a lot rougher than C5 in the pictures above, so I don't believe that was the same boat unless those photos are older. It was most certainly not the white painted one in the other thread. The decking was pretty bleached out and it was in need of a total restoration, but it was pretty much all there.

PROP RIDERS RACING
08-01-2017, 11:56 PM
I have one that has never been in the water. It was the second one the DeSilva's built for me. I ran a 500cc Yamaha on the first one and it would not stay on the water once you reached 100mph+.

25XS
08-03-2017, 08:19 AM
I have one that has never been in the water. It was the second one the DeSilva's built for me. I ran a 500cc Yamaha on the first one and it would not stay on the water once you reached 100mph+.

Prop Riders, could you post a few pictures of your boat, and also could you post the I.D. stamp off the keel inside the boat for us?
Any pictures or video and could you tell us how the boat handled with the Yamaha 500 engine?
Thanks

1100r
08-03-2017, 10:12 AM
There is,another if I'm not mistaken in Georgia. The number on the boat was 26-Z. I think anyway as its on the DeSilva Race boat site in FB. The guy was going to restore it. And love seeing Goldstone old C-5. Tom let his,wife Barbara run 1100r with that boat one year at Shadow Cliffs

zul8tr
08-03-2017, 01:10 PM
DeSilva tunnel, states bought it from Harry Brinkman, looks questionable ?

https://northernwi.craigslist.org/boa/d/desilva-tunnel-hull-wood/6192515997.html

Steve Litzell
08-03-2017, 03:50 PM
DeSilva tunnel, states bought it from Harry Brinkman, looks questionable ?

https://northernwi.craigslist.org/boa/d/desilva-tunnel-hull-wood/6192515997.html
What is questionable Pete? That boat was the triplane they made. A little history here. At the time, runabouts had pretty loose rules. DeSilvas made a runabout with the same type delta tunnel on the right side only to help turn the boat better. Motors were also stepping up in the HP area. As Todd said his Yamaha would go 100 plus. The boats at the time could not deal with the speed and no down force of the current design. Also at this time, before the Delta runabout, the 45 SS was introduced by OMC. I tested with DeSilvas the 45 SS on the half side Delta boat at Second Efforrt in Florida with Ziggy and Dave Hammond the two spearheading the 45 SS project. Just after that day Fred Miller decided that we needed a tunnel type boat for this motor. DeSilvas made the first tri plane and Ralph Donald and I tested it for them in Florida with my C (500) KONIG on it. It would roll over a hundred easy. Back at my House when I was living in Florida, Ralph and I were enjoying some of Lynchburg Tennessees finest and I brought up the fact that according to the rule at the time, the Delta boat, aka Tri Plane was a runabout. With that I said Moorhaven Kilos were in a few weeks and I should bump the C (500) runabout record a bit. That was the plan, until Ralph told Ralph DeSilva our plans. DeSilvas asked we not do that as they had a better idea, enter the Delta runabout and as they say, the rest is history. Todd ran his with Yamaha at Nationals in DePue in 87 and if he had not 1. Killed a turn bouy in one heat and the mess of the drivers did not jump the gun in last heat, he would of won the nationals with the Delta boat. Steve

zul8tr
08-04-2017, 01:50 AM
Steve thanks for the history I had no idea about this tri boat that's why "questionable". Pete

John Schubert T*A*R*T
08-04-2017, 12:45 PM
What is questionable Pete? That boat was the triplane they made. A little history here. At the time, runabouts had pretty loose rules. DeSilvas made a runabout with the same type delta tunnel on the right side only to help turn the boat better. Motors were also stepping up in the HP area. As Todd said his Yamaha would go 100 plus. The boats at the time could not deal with the speed and no down force of the current design. Also at this time, before the Delta runabout, the 45 SS was introduced by OMC. I tested with DeSilvas the 45 SS on the half side Delta boat at Second Efforrt in Florida with Ziggy and Dave Hammond the two spearheading the 45 SS project. Just after that day Fred Miller decided that we needed a tunnel type boat for this motor. DeSilvas made the first tri plane and Ralph Donald and I tested it for them in Florida with my C (500) KONIG on it. It would roll over a hundred easy. Back at my House when I was living in Florida, Ralph and I were enjoying some of Lynchburg Tennessees finest and I brought up the fact that according to the rule at the time, the Delta boat, aka Tri Plane was a runabout. With that I said Moorhaven Kilos were in a few weeks and I should bump the C (500) runabout record a bit. That was the plan, until Ralph told Ralph DeSilva our plans. DeSilvas asked we not do that as they had a better idea, enter the Delta runabout and as they say, the rest is history. Todd ran his with Yamaha at Nationals in DePue in 87 and if he had not 1. Killed a turn bouy in one heat and the mess of the drivers did not jump the gun in last heat, he would of won the nationals with the Delta boat. Steve
Steve,

I actually believe that the boat in Rhinelander might be the 45 boat you tested, Jon Stone raced & even Pete Hellsten did.

Steve Litzell
08-04-2017, 05:58 PM
Don't think this is the same boat John, the one we ran looked different to my memory. And I had a mechanical trim and tilt that Ickes the motor and leaned to left in corners. Charlie Strang liked what Idid when he seen it at Race in Ocoee he gave two thumbs up. I copied what I had seen in Europe from the Russian hydrocats. ( the Russians did it). As I said we ran it only a couple times as I was concentrating on my 700 hydro for the WC in Pleasanton and also the runabout.

John Schubert T*A*R*T
08-05-2017, 07:02 AM
Don't think this is the same boat John, the one we ran looked different to my memory. And I had a mechanical trim and tilt that Ickes the motor and leaned to left in corners. Charlie Strang liked what Idid when he seen it at Race in Ocoee he gave two thumbs up. I copied what I had seen in Europe from the Russian hydrocats. ( the Russians did it). As I said we ran it only a couple times as I was concentrating on my 700 hydro for the WC in Pleasanton and also the runabout.
Steve,

You might be right although I thought that they only built the one SST45 tunnel. After looking again, I really don't see the transom bolt pattern for ther 45. I'm very familiar with the 45's as I probably built over 50 of them for many drivers including Gordie Miller & Garrett Armstrong.
Speaking of testing for Bill & Ralph, when I lived in Winter Haven while at a race in Dayton, Bill in a conversation said "it's too bad you didn't live closer to us in GA, as we would like to have you test our boats". Me in a runabout, don't think so. He meant hydros & tunnels.

dsaulsbury
08-09-2017, 06:28 AM
I have one that came from Wisconsin that I ran stock powerhead 4-60 pump on a 4-60 racer tower and foot. It came with a custom trailer. It has a serial number in the cockpit, but I don't remember what is is. The boat and trailer are for sale as I have sold all of my antique racing stuff. I would take $750 for both. The boat was attacked by a red squirrel (minor damage) and the trailer has an slightly bent axle giving tire wear. I will check on the serial number.

I have added two pics. One of the cowl decal and one of the serial number in the cockpit. I am guessing that it is the second boat of four in 1988. I was told by a racer in central PA that this boat was a 500cc boat. The transom extension was for running a 4-60 that the owner before me had. The trailer is registered, but the boat is not. I have additional pics if you would like.

My antique racer website is - http://boatsport.org/DonSaulsbury/

626236262462625626266262762628

DeanFHobart
08-09-2017, 09:02 AM
Cool stuff... Desilva was very innovative to say the least... This is a lot of really cool history... Thanks.

Steve Litzell
08-09-2017, 10:22 AM
I checked out your video Don, The boat you have is not a delta runabout but one of the triplanes they made. Because you bought from someone in Pa, it could of been the boat i had but I don't know really where that one went. Steve

Tim Weber
08-09-2017, 06:39 PM
What you have is a 4-60 boat made for the Depere WS antique nationals in I think 1987?

It was driven by Dave Riser. After that I think Mike Gibson had it.

It was basically a kneel down tunnel.

Tim