PDA

View Full Version : Signature BRAVO I, II OR III STAINLESS STEEL GIMBAL RING



Ron Hill
07-03-2022, 06:46 PM
:cool:We have been making these Signature stainless steel gimbal rings for Bravo I, II and III since 1997. They don't wear out. They are in stock at Hill Marine 714-855-2986 or on E-Bay. https://www.ebay.com/str/ronhillsignaturepropellers/GIMBAL-RING-BRAVO-I-II-III/_i.html?store_cat=3026924012

DeanFHobart
07-04-2022, 05:28 AM
We have been making these stainless steel gimbel rings for Bravo I, II and III since 1997. They don't wear out. They are in stock at Hill Marine 714-855-2986 or on E-Bay. https://www.ebay.com/itm/151234921520

What are they used for?

Ron Hill
07-15-2022, 11:27 AM
A gimbal ring holds the sterndrive with four pins, it allows the motor to turn and the other two pins allows the motor to trim up. Mercury Marine makes these in aluminum but square hole wears out and allows a lot of play in the steering. Stainless basically last forever. Been making these gimbals since 1997.

tlpyamato
07-16-2022, 07:53 AM
[QUOTE=Ron Hill;159063]We have been making these stainless steel gimbal rings for Bravo I, II and III since 1997. They don't wear out. They are in stock at Hill Marine 714-855-2986 or on E-Bay. https://www.ebay.com/str/ronhillsignaturepropellers/GIMBAL-RING-BRAVO-I-II-III/_i.html?store_cat=3026924012

Hi Ron:

That link takes me to:

"Signature 11 X 15 RIGHT Hand Three Blade V-Drive Blade Propeller 1" Taper"

.......not to stainless steel gimbal rings.

tlpyamato

Glad you are paying attention!

Ron Hill
07-16-2022, 09:25 AM
https://www.ebay.com/str/ronhillsignaturepropellers/GIMBAL-RING-BRAVO-I-II-III/_i.html?store_cat=3026924012

Or www.hillmarine.com is our web site!

tlpyamato
07-17-2022, 06:49 AM
https://www.ebay.com/str/ronhillsignaturepropellers/GIMBAL-RING-BRAVO-I-II-III/_i.html?store_cat=3026924012

Thanks Ron...........that works much better :)

Ron Hill
08-28-2022, 06:53 PM
Ron Hill Signature Propellers (https://www.ebay.com/str/ronhillsignaturepropellers)


All your propeller needs!

BC (Bullet Cut) Performers perfect for Bullet Bass Boats with 300R's. ($1,500) FIVE BLADE CLEAVER LEFT AND RIGHT 15 DEGREE AND 18 DEGREE FOR 300R'S, 400R'S and 450R's. ($2,360)

Ron Hill
02-21-2024, 01:32 PM
We make and sell many of these gimbels in stainess steel for Bravo I, II and III. We have made them since 1996. They don't wear out, no stering slop!

Right now, we aren't panicking but our ususal winter sales are off on these.

The weather has been so bad nationwide, I don't think people can even get their boats out of their garages.

https://www.ebay.com/str/ronhillsignaturepropellers?_trksid=p4429486.m14568 7.l149086

10% off on gimbels and swivels. Free shipping in the USA!