PDA

View Full Version : Mercury 20hp 98 model



seal supa skua
01-12-2006, 02:05 AM
Hi, just wondering what it is on the motor that restricts it to 20hp rather than 25hp? .....and can i easily change something to make it a 25hp.

crankbearing
01-12-2006, 05:20 AM
I would check the Carb - Jetting and Reeds/block. Maybe the gear ratio as well but I would look at the carb first.

Regards,

JohnsonM50
01-15-2006, 01:45 PM
As mentioned, carb, reeds are in that order most likely where it is, if you can get a look at a parts manual youll know for sure. The tune-up specs could show a difference like timing or syncronizing. Good luck, its probably there.