I have built over 15 national championship winning SST 60s. The last 8 years I have run been about 100 - 102 hp at the crank. We dyno with the exhaust housing and gearcase so we match correct exhaust back pressure. The mod engines I make for lake racers or X class inflatables are now up to 118 hp. This is with stock SST 60 carbs. I'm working on one right now that is very over due. Porting includes finger porting, Boost port reground, A lot of grinding in the transfer ports, Exhaust port reshaping and timing edges of all ports to my own specs. Stock head with welded smaller thermostat hole, then re-machine to smaller ccs and angled squish band added. SST 60 reed pedals and grinding in intake and matching the case. Bored to .030 over with Line2Line coated pistons from Pro Marine. Stock SST 60 tuner. We have over 350 dyno runs doing development work on these. Dyno all computerized so no bull crap. Can't argue with the win history.