Building A looper Beast

[R Austin]

Guess if I want to stay on the sticky list I need to update the thread a little more often. Has been a while, time sure flying by.
I have run the engine on the dyno a few times as I continue to dial in the fuel injection map. I have reinstalled the dual plug heads with the chamber volumes cut from 20cc's to 16cc's. The ignition system, at least on the dyno, seems to be functioning properly and firing the dual coils effectively.
Will run again this week and clean up and reinstall on the boat. Will be taking to the Pentwater Antique Wooden Boat show on the 27th and then look for an AOMCI event. Possibly Lapeer Mi. in September.
Will See!

[Ron Hill]

Kind of getting back to my "ROOTS" getting away from the Communist on Facebook. I have been dropping various threads off the sticky list.

[Dew1us]

Guess if I want to stay on the sticky list I need to update the thread a little more often. Has been a while, time sure flying by.
I have run the engine on the dyno a few times as I continue to dial in the fuel injection map. I have reinstalled the dual plug heads with the chamber volumes cut from 20cc's to 16cc's. The ignition system, at least on the dyno, seems to be functioning properly and firing the dual coils effectively.
Will run again this week and clean up and reinstall on the boat. Will be taking to the Pentwater Antique Wooden Boat show on the 27th and then look for an AOMCI event. Possibly Lapeer Mi. in September.
Will See!

If you do go to Lapeer let us know I might swing up to see it.