Thanks Thanks:  0
Likes Likes:  0
Results 1 to 4 of 4

Thread: Tohatsu 50 hp tilt trim replacement

  1. #1
    Team Member
    Join Date
    Apr 2008
    Posts
    5
    Post Thanks / Like

    Default Tohatsu 50 hp tilt trim replacement

    This motor has been used extensively in salt water. Does not show it except on the manual tilt lock has rusted and is frozen. The trim recently started leaking fluid. Decided to remove and repair/ replace. Cannot get pin out holding trim in bracket. Any ideas? Thanks for your help!

  2. #2
    Team Member
    Join Date
    Apr 2008
    Posts
    5
    Post Thanks / Like

    Default

    Anyone know how to do this?

  3. #3
    Team Member
    Join Date
    Apr 2008
    Posts
    5
    Post Thanks / Like

    Default

    Finally got it out without breaking the bracket!

  4. #4
    Team Member ice_spy's Avatar
    Join Date
    Aug 2009
    Location
    NSW Australia
    Posts
    54
    Post Thanks / Like

    Default

    heat and then cold gas in the right spots can unfreeze most rusty bolts etc.
    If you do find a replacement m50d trim tilt assembly in the usa, please let me know if there is another spare one for me
    The race never stops

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •