I'm sure this has been brought up before but I can't find the thread?
Basically I'm wanting to put yamaha 70 carbs on my Tohatsu 50 D2, how easy is it to do? anyone done it? do they require re-jetting?
Thanks!
I'm sure this has been brought up before but I can't find the thread?
Basically I'm wanting to put yamaha 70 carbs on my Tohatsu 50 D2, how easy is it to do? anyone done it? do they require re-jetting?
Thanks!
theyre from a 1997 model
I don't know if/how they will fit, but you will have to play around with jets with any kind of changes you make to get the most out of it.
thanks for the reply, yeh i've heard i'll need to change some of the jets. don't know what to yet though.
they bolt on, main jet, it's been a wile, should have a 130-135 main in the 50hp carbs, 145 for the 70 carbs on a 50hp. you maybe able to lean on her more at 140, but start with 145's
Part one of "Secrets of the OMC Mod 50" : http://www.boatracingfacts.com/forums/showthread.php?t=2052
Hey Fred, was hoping you'd chime in! Thanks for the advice. I've heard there's some benefit to widening the reed block when going to 70hp carbs?
In for later.
Sent from my iPhone using Tapatalk
Using Tapatalk
So what is the purpose of welding the crank? Is it because of high RPMs?
Sent from my iPhone using Tapatalk
Using Tapatalk
Yeh, the tohatsu cranks aren't as strong as the yamaha 50 ones, so for anything over stock RPM welding the crank is necessary
also, does anyone know where to source jets for yamahas? Trying to find a link or something online
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks