Page 2 of 5 FirstFirst 12345 LastLast
Results 11 to 20 of 43

Thread: information on an F class Coutts hydroplane?

  1. #11
    Team Member zul8tr's Avatar
    Join Date
    Oct 2008
    Posts
    511
    Post Thanks / Like

    Default

    Looks good after all those years. Next time out would like to see a fly by at max speed. Interesting sponson chine and bottom planking rear curve shape On the turn fin why builder tucked it in so far that left turn spray will hit the rear chine side plywood, not clean turn spay more drag? I see fin removed in latest pic, unless you want to keep boat original consider moving it out more for clean fin spray ?

    Happy safe running
    " Three may keep a secret if two of them are dead" Ben Franklin
    " ------- well Doctor what have we got a Republic or Monarchy? A Republic he replies if you can keep it"
    Benjamin Franklin, 1787 Constitutional Convention, as recorded by signer James McHenry's in his diary at the Library of Congress

    Location: SW Orlando, Fl

  2. #12
    Team Member
    Join Date
    Mar 2014
    Location
    Florida
    Posts
    149
    Post Thanks / Like

    Default

    Ditto on the fly-by at max speed...while planting butt at the back of the boat.

  3. #13
    Team Member
    Join Date
    Dec 2022
    Posts
    22
    Post Thanks / Like

    Default

    Quote Originally Posted by zul8tr View Post
    Looks good after all those years. Next time out would like to see a fly by at max speed. Interesting sponson chine and bottom planking rear curve shape On the turn fin why builder tucked it in so far that left turn spray will hit the rear chine side plywood, not clean turn spay more drag? I see fin removed in latest pic, unless you want to keep boat original consider moving it out more for clean fin spray ?

    Happy safe running
    Will have a video once I've actually ran at max speed, want to get used to the boat first.

    It is an interesting shape, the surface getting smaller at the back probably contributes to the fin being so far inwards. if we wanted it further out we'd likely need a different fin so ill probably leave it for now unless its a problem

  4. #14
    Team Member zul8tr's Avatar
    Join Date
    Oct 2008
    Posts
    511
    Post Thanks / Like

    Default

    Good idea to get used to the boat before serious top speed runs.

    The fin where it presently is should not be a problem but it will not give clean water off fin blade in a turn. When used to boat at speed make left turns at top speed and see what happens with the water spray off the fin and see how much water the rear chine carries with the fin spray. Ideal is to have minimal left turn fin spray hit the rear chine which is more drag and also tends to lift the boat (rotate CW) to port and forces right side of boat down. Plus clean fin spray looks cool! ;-)

    When the fin is remounted measure how deep the blade is below the sponson bottom.

    Your present fin could be useable to move out: depends on dimensions and blade hole and other details, in turns how deep the fin is needed in the water, if adequate rear sponson back wood is available to secure fin bracket.

    My hydro set up optimum (Avatar) carried no fin in the water in the straights in the turns I would move forward some and lean left some and sink the fin to grab, fin set far outboard. Hydros need to run at speed with sponsons off the water.

    Be safe and safety first and have a rescue boat. In the video you have no helmut get a good one.
    " Three may keep a secret if two of them are dead" Ben Franklin
    " ------- well Doctor what have we got a Republic or Monarchy? A Republic he replies if you can keep it"
    Benjamin Franklin, 1787 Constitutional Convention, as recorded by signer James McHenry's in his diary at the Library of Congress

    Location: SW Orlando, Fl

  5. #15
    Team Member
    Join Date
    Dec 2022
    Posts
    22
    Post Thanks / Like

    Default

    Didn't realize it would rotate the boat like that, you can sort of feel it doing that though.

    The location of the drain plug is the real problem as the fin has a cut out for the plug hole, fin is about 2.5"-3" below the boat. Wow didn't realize all the hydros would run like that haha, seems like a fun ride sponsors out. As it is feeling the lift of the boat and acceleration is already pretty crazy to me.


    Will be getting a better jacket and helmet next year as we have only had it running since labor day

  6. #16
    Team Member zul8tr's Avatar
    Join Date
    Oct 2008
    Posts
    511
    Post Thanks / Like

    Default

    There is a lot of upward force off that fin spray especially at speed that hits the rear chine and causes some CW boat rotation to dip the right side down influencing turning.

    The fin assembly can be made to fit outboard on the sponson back and the 90 degree fin angle bracket can be secured just above the drain hole. Just have to make the bracket and fin to suit your boat. I have it that way on my hydro with the drain hole just below the bottom of the 90 degree bracket and the fin blade is designed to be vertically adjustable with several holes in it to suit the boat drivability in turns and clear of water in the straights. Each boat is different and good testing resolves issues.

    Can send sketch if interested.

    There needs to be adequate wood thickness on the inside sponson back to secure the fin bracket. Bolts are best with back fender washers if you can get your hands in there if lightening hole is in in port coaming near the dash board?
    " Three may keep a secret if two of them are dead" Ben Franklin
    " ------- well Doctor what have we got a Republic or Monarchy? A Republic he replies if you can keep it"
    Benjamin Franklin, 1787 Constitutional Convention, as recorded by signer James McHenry's in his diary at the Library of Congress

    Location: SW Orlando, Fl

  7. #17
    Team Member
    Join Date
    Dec 2022
    Posts
    22
    Post Thanks / Like

    Default

    here is the fin on the boat. it could definitely be moved, i see what you mean about the spray forcing one side up.
    Attached Images Attached Images   

  8. #18
    Team Member
    Join Date
    Dec 2022
    Posts
    22
    Post Thanks / Like

    Default

    Quote Originally Posted by Dew1us View Post
    Where did you pick the boat up? Did a motor come with it? My Father would have Knowledge on Jim Coutts.
    do you have any photos of other coutts boats, or racers with them?

    this boat appears to have been all red before the previous owner painted the white on the front.

  9. #19
    Team Member Dew1us's Avatar
    Join Date
    Jan 2006
    Location
    Jackson, Mi
    Posts
    42
    Post Thanks / Like

    Default

    Name:  Couts1.jpg
Views: 1457
Size:  41.9 KB

    These were some of the Stones Couts Crafts. And they were green not purple as I originally thought.
    - Craig "Dew"
    Flyer Race Boats

  10. #20
    Team Member zul8tr's Avatar
    Join Date
    Oct 2008
    Posts
    511
    Post Thanks / Like

    Default

    Referring to sponson fin in post #17 you said:
    "here is the fin on the boat. it could definitely be moved, i see what you mean about the spray forcing one side up."


    Yes the fin can be moved outboard above the drain hole and be adequately clear of the rear chine top edge. Would need to not use that present fin with the clamp style bracket to secure the fin. I used for the bracket a 90 degree radius inside corner 1/4" thick alum (length dependent on boat specific dimensions) with one leg facing inward and secured to the sponson back the other angle leg faces rearward and the fin is secured to the inside face of that angle leg. The fin blade is made of 1/4" alum of proper shape and length.

    If interested in I can send a design sketch and pics of what is on my hydro which is essentially same a s described above.
    " Three may keep a secret if two of them are dead" Ben Franklin
    " ------- well Doctor what have we got a Republic or Monarchy? A Republic he replies if you can keep it"
    Benjamin Franklin, 1787 Constitutional Convention, as recorded by signer James McHenry's in his diary at the Library of Congress

    Location: SW Orlando, Fl

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Hydroplane Trailer
    By hydrodriver in forum Parts and Accessories
    Replies: 0
    Last Post: 03-03-2022, 02:50 PM
  2. Hydroplane in france if you want !
    By jackus173 in forum Boat Racing Encyclopedia
    Replies: 0
    Last Post: 07-06-2011, 06:47 AM
  3. SST 120 Information
    By three_banger_omc in forum Technical Discussion
    Replies: 1
    Last Post: 07-15-2010, 12:44 PM
  4. Is There A Bible For Hydroplane Set Up
    By hydrobuzzie in forum Technical Discussion
    Replies: 9
    Last Post: 01-29-2009, 01:27 AM
  5. looking for alot of v4 information
    By john/rude in forum Technical Discussion
    Replies: 17
    Last Post: 04-14-2007, 04:20 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •