At the invitation of Ron, I post a photo of his new boat.
While the construction process:
P.S. Sorry for my english
At the invitation of Ron, I post a photo of his new boat.
While the construction process:
P.S. Sorry for my english
Length of 17 feet, the planned power of the engine 170 h.p.
I use motocycle engine (inboard) Honda VFR 1200 FD with two-stage transmission.
I use self-made Arneson surface drive:
calculated speed - 68 knots
Great looking boat and work !
Thanks!
As the work will post new photos.
Thats awsome, thanks for sharing the pictures.
Began make ship's skin. It will be a sandwich structure, core - polyurethane foam Divinisell Diab, density 60kg/m3...
Laminates of kevlar and glass...
This is a tedious and long work
Beautiful framing, but I was expecting it to be covered in plywood. Hard to beat plywood for strength to weight when you have that much framing already. Just curious as to why you are doing foam? I would think a foam core construction would require less framing than you have done here.
You are right! Foam on the board only, everything to be covered in plywood. Board has a curved shape, and it is difficult to do using plywood. For rigidity and strength is not required as frequent framing, this is done for the correct form. Some parts of the framing will be removed later.
Better to have frequent and accurate framing, than make surface finish long time.
I'm so sorry!, but I have not spoken in English, and perhaps not always correctly say...
You know what I mean?
There are currently 3 users browsing this thread. (0 members and 3 guests)
Bookmarks