I'm restoring FT10S Johnson. It has GT 115 gearcase.
Does anyone know what is the torque on the pinion nut?
There are two pinion gears and nuts.
I understood that Speedmaster pinion nut torque is 70 Nm and with Loctite.
I'm restoring FT10S Johnson. It has GT 115 gearcase.
Does anyone know what is the torque on the pinion nut?
There are two pinion gears and nuts.
I understood that Speedmaster pinion nut torque is 70 Nm and with Loctite.
70n-m = 52 ft-lb seems high for such a small nut (from what I can estimate in the pic) yes on the locktite. Get a firm reliable answer on the torque.
" Three may keep a secret if two of them are dead" Ben Franklin
" ------- well Doctor what have we got a Republic or Monarchy? A Republic he replies if you can keep it"
Benjamin Franklin, 1787 Constitutional Convention, as recorded by signer James McHenry's in his diary at the Library of Congress
Location: SW Orlando, Fl
Now I have other problem with that lower unit. I don`t know what is correct load on the driveshaft when adjusting upper gears. Does anyone know?
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks