I would be very interested in some stacks if the OP is not.
Thank you
I would be very interested in some stacks if the OP is not.
Thank you
Update on how it is going
Got the new prop last week 11x18 over hub cleaver, going to do some runs this weekend hopping for 40mph "so close". running a 5in jack plate really helps any other tips would be great?
Here are some pictures
hydrospeed77 liked this post
Emustard, did u buy them stacks for that engine???? that prop looks good, u headed in the right direction, but i believe u could stand alittle more pitch,and diameter to at that motor height u running,, the guy thats got the stacks can fill u in on what he had and he may still have that prop he run.
Let it all Hang out
I did not end up buying the stacks. I wanted to, but I run this motor every weekend and would probably get shot for being to loud LOL people already think I am to loud. on the weekend we did a little bit of running on the weekend and hit 38mph at 5500 into the wind. still had about another 200rpms but ran out of room and waves were to big.
Who made the cleaver ?
Tested the motor this weekend ran a 41.2 mph, had it jacked all the way up and still had great water pressure so maybe put a shim or move the jack plate up an inch. We reached our goal so thanks everyone for helping and giving your input now everything else will be a bonus so maybe 50mph now LOL, will see.
Motor still runs great, don’t use it as much, but works well during hunting season. As long as you can get the motor up, you should have no problem turning that 16pitch
There are currently 3 users browsing this thread. (0 members and 3 guests)
Bookmarks