Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 26

Thread: Swift hydro hull number/year?

  1. #11
    Team Member Master Oil Racing Team's Avatar
    Join Date
    Jan 2005
    Location
    Sandia, Texas
    Posts
    3,831
    Post Thanks / Like

    Default

    What's the length of your boat?



  2. #12
    Team Member twostroke's Avatar
    Join Date
    Sep 2018
    Location
    Central Lower MI
    Posts
    12
    Post Thanks / Like

    Default

    Quote Originally Posted by Master Oil Racing Team View Post
    What's the length of your boat?
    Swift's literature back in the day says 133".....my tape is telling me 11' give or take less than an inch.

    Jim
    I say "Pardon Me" a lot. I had a 20H with a toilet bowl, then raced open mod sleds.

  3. #13
    Team Member Master Oil Racing Team's Avatar
    Join Date
    Jan 2005
    Location
    Sandia, Texas
    Posts
    3,831
    Post Thanks / Like

    Wink

    Seems like zul8tr is on the right track regarding the serial number and my thinking is the 112 after the UHD regarding the model refers to it's length.....an approximate 11-2 foot boat. You know sometimes you gotta hedge a little.



  4. #14
    Team Member twostroke's Avatar
    Join Date
    Sep 2018
    Location
    Central Lower MI
    Posts
    12
    Post Thanks / Like

    Default

    I thought the same when I obsessed over the s/n....

    Thanks!

    Jim
    I say "Pardon Me" a lot. I had a 20H with a toilet bowl, then raced open mod sleds.

  5. #15
    Administrator Ron Hill's Avatar
    Join Date
    Nov 2004
    Location
    Tustin, California
    Posts
    3,406
    Post Thanks / Like

    Default That was a Big "D" Swift

    I never saw but maybe one of these and I think Burt Ross had it and it was all mahogany. My brother had a C-D-F-X Swift of 1953 era. We owned a Big Bee Swift, but, hell I don't recall any serial numbers. DeSilva is the only ones I remember.

  6. #16
    Team Member jrome's Avatar
    Join Date
    Jan 2005
    Location
    stafford texas
    Posts
    179
    Post Thanks / Like

    Default

    I think it was made on the 63 day of 1958

  7. #17
    Team Member twostroke's Avatar
    Join Date
    Sep 2018
    Location
    Central Lower MI
    Posts
    12
    Post Thanks / Like

    Default

    Quote Originally Posted by jrome View Post
    I think it was made on the 63 day of 1958
    That actually makes good sense.... Tuesday, March 4, 1958. That makes it about two months older than I am. Sure wish someone would have taken as good of care of me as they have this boat....

    Thanks!

    Jim
    I say "Pardon Me" a lot. I had a 20H with a toilet bowl, then raced open mod sleds.
    Likes Ron Hill liked this post

  8. #18
    oldalkydriver
    Guest

    Default

    Now, don't quote me on this. The few swifts that I was around (which was over 60 years ago), this is how I read it; Utility Hydro 'D' Class (stock), eleven foot 2 inches hence 112, 06 June, 03rd day of completion, 58 is the year (1958), and 114 is how many boats thus far that year!
    Last edited by oldalkydriver; 09-23-2018 at 12:05 AM. Reason: forgot D

  9. #19
    Team Member
    Join Date
    Jun 2005
    Location
    Eastern PA
    Posts
    661
    Post Thanks / Like

    Default

    If I can ask a really stupid question... How do you folks out there, with a similar looking boat as this one, keep if from shifting forward on your trailer? I note that, in this case, there's nothing to keep it in place during a sudden stop.

    Jeff
    "We live at the bottom of an ocean of air." - General Marvage Slatington

  10. #20
    Team Member zul8tr's Avatar
    Join Date
    Oct 2008
    Posts
    511
    Post Thanks / Like

    Default

    Some put bumpers at the front on these lake runner set ups. With race type trailers that are different than what is in this tread the stacking of boats is different to allow tie backs to the trailer. In my case the trailer motor box is at the rear and both boats are forward of that and are tied back to the box via the lift handles so restricted move forward from braking is not an issue and backward move from acceleration is not an issue since boats push against the box.

    Jeff it is not a stupid question.
    Pete
    " Three may keep a secret if two of them are dead" Ben Franklin
    " ------- well Doctor what have we got a Republic or Monarchy? A Republic he replies if you can keep it"
    Benjamin Franklin, 1787 Constitutional Convention, as recorded by signer James McHenry's in his diary at the Library of Congress

    Location: SW Orlando, Fl

Thread Information

Users Browsing this Thread

There are currently 2 users browsing this thread. (0 members and 2 guests)

Similar Threads

  1. Joe Swift
    By Mark75H in forum Boat Racing Encyclopedia
    Replies: 36
    Last Post: 04-11-2013, 09:42 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •