formeone are you runnin a thermo in the head? are you sure she is gettin up to temp?
formeone are you runnin a thermo in the head? are you sure she is gettin up to temp?
Part one of "Secrets of the OMC Mod 50" : http://www.boatracingfacts.com/forums/showthread.php?t=2052
no thermostat,,, now running digitron with temp so will know,,,, about 4 or 5 of us have same prob up here sooo just not me,,,, mmmm will check some previous posts i guess ,,,,,
is that with stock 49 rods or Mod 50 length?
stock 49 rods and wiseco"s hec have taken stock evinrudes apart and seen cracked skirts also!!
sounds cold to me, with out a 6 pack front 1/2 she will not make enough BTU's to over come the coolin system without a thermo. runs cold, needs temp to expand and make the clearances needed.
Part one of "Secrets of the OMC Mod 50" : http://www.boatracingfacts.com/forums/showthread.php?t=2052
mmm thanks fred will check with temp on my didgitron and also thermo gun,,,,, wierd that also see stockers crack there skirts also on sum of the motors ive taken apart,,,,, i know it a hec of a problem here between all of us,,,, hec the one guy skirt cracked when leading the nats last summer and vented his motor,,,,
the film clip, SST60 cases New, new wisco's, all tricked out inside. she's got a thermo, needs it to hold a runnin temp. the 75hp thermo set up is trick, got a thermo and two relief valves, if you don't have a Mod50 front 1/2 setup, you need a thermo. or she will not get up to temp.
Part one of "Secrets of the OMC Mod 50" : http://www.boatracingfacts.com/forums/showthread.php?t=2052
Fred are you running the stock reed set up on that sst60 or is that a mod56.i have been toying around with differnt reeds for the stock cages like differnt reed meterial like carbon fiber,plastic,custom cut metal just about every thing you can think of. Is that going on a raft for somebody?
ya, goin on a SLT. on the reed block, i like the two stage reeds, with one big bottom reed, and cut the ribs and webbin out of the block, for more volume over the stock block.
she's in deep in the tank, did well anyway,the fuel pump don't like to pull through the filter, i put her back in the tank the next day, she ran better
Part one of "Secrets of the OMC Mod 50" : http://www.boatracingfacts.com/forums/showthread.php?t=2052
There are currently 19 users browsing this thread. (0 members and 19 guests)
Bookmarks