And video, Tim, video!
Jeff
And video, Tim, video!
Jeff
"We live at the bottom of an ocean of air." - General Marvage Slatington
Go with the rolling element brg.. With a half inch pin and not much length you'll seize it in no time without full pressure lubrication (or even with full pressure lubrication). If you keep the speed down you may not have a long bearing life, but it won't seize up after a few minutes... Remember that the angular rotation is all you have to deal with and the full complement bearing can take a good bit of load.
http://thekneeslider.com/the-hossack...on-two-stroke/
As long as we are talking about out of the box thinking Mr Hossack has an idea too.
Novel port blocking with the rocking piston.
Tim what you need to get some pumping for starting is one of these
electrically driven supercharger. link that to the exhaust turbine side h
as a built in clutch so as the exhaust pressure rises the electric motor is disconnected.
the nice thing about the merlin or other aero engine conrod arrangement is the master rod creates a bearing journal for the second rod.
There are currently 4 users browsing this thread. (0 members and 4 guests)
Bookmarks